Electrical Supervisor

Electrical supervisor jobs Saudi Arabia: This Electrical Supervisor vacancy is based in Jubail, Saudi Arabia, in the Constructions sector.

Job description

An Electrical Supervisor guides electrical crews through construction work, from planning installation tasks to checking finished systems. The role links site drawings and daily work plans with safe work methods and quality checks. In construction, this usually means organising electricians, checking materials and tracking progress across several work areas. The aim is to complete electrical installations that match the approved design and are ready for inspection and testing. Depending on the project, this work may cover buildings, utilities, substations or industrial facilities.

When several crews share an area, each team needs to know where its work starts and ends. Clear task boundaries help prevent one team from working on a circuit or piece of equipment while another team tests it. Before crews start, the supervisor uses practical experience to check that they have the right tools, clear instructions and safe access. The supervisor normally reads electrical drawings, explains the work order and checks that workers understand their tasks. Although this is a hands-on leadership role, it includes reporting progress and raising technical questions. If drawings conflict or site conditions change, the supervisor asks the responsible engineer for guidance rather than changing the design without approval.

Electrical supervisor jobs Saudi Arabia – Daily work and practical tasks

A typical work stage begins with a review of the latest drawings and a check of the work area. The supervisor checks cable routes, equipment positions and access points. This review includes any unfinished civil or mechanical work that could delay electrical installation. With these checks complete, the supervisor organises materials and gives tasks to suitable workers. During installation, regular checks help crews find errors before they cover cables, close walls or finish connections. This is especially important around pipe racks, equipment foundations and shared service routes, where electrical work must fit safely alongside other construction activities.

Team coordination and communication

Safety and quality checks continue through every work stage. Before work begins, the supervisor checks the relevant work controls and access arrangements with the responsible site staff. They also confirm the electrical isolation status, so the crew knows whether the equipment or circuit is safely disconnected from power. When work reaches testing or power connection, the supervisor must coordinate carefully with authorised personnel. Quality checks often cover cable identification, equipment fixing, earthing connections and the condition of installed items. By finding a loose connection, damaged cable or incorrect route early, crews can prevent larger problems during testing. While nearby construction continues, the supervisor helps workers protect completed installations from damage.

Good supervision does more than deliver completed installation work. It gives engineers and site managers a clear picture of progress, problems and remaining tasks. To support this, a supervisor typically keeps daily records, tracks inspection requests and follows up on defects. As an area nears completion, the focus shifts towards testing support, finishing outstanding items and keeping records accurate. These records then help the team prepare for handover. The exact systems depend on the assigned project, but the following activities describe practical work commonly linked to electrical construction supervision.

Role-specific work processes

• Review drawing versions before assigning work. Compare layouts, cable schedules and connection details so crews have clear information for their tasks. If any points are unclear, raise them with the electrical engineer. Make sure crews use current instructions rather than older copies that may show different routes or equipment locations.
• Plan cable tray, conduit and support installation around site access and other trades. Check routes for clashes and allow space for maintenance. Before workers drill, cut or secure supports, confirm the fixing details against approved drawings so installation follows the agreed design.
• Organise cable handling and pulling with the crew. Before pulling starts, check cable drum labels, route lengths and suitable pulling equipment. During the work, watch bend limits and pulling methods to help workers avoid damaging insulation or mixing cables intended for different circuits.
• Follow equipment installation against the approved scope. Typical items include distribution boards, lighting fixtures, switches and local control panels. As workers install these items, check their positions, secure mounting and protection from dust or water. If equipment is damaged, report it before installation continues.

Practical work stages

• Check earthing and cable connections during the work rather than waiting for the final inspection. Confirm labels, cable glands and connection details against approved documents. If the installation does not match those documents, ask the responsible staff to resolve the issue before crews close equipment covers.
• Support safe inspection and testing by arranging access, identifying circuits and coordinating with authorised test personnel. During these activities, keep the work area controlled and record defects clearly. Even when installation is complete, never treat it as safe to connect to power without the required project approval.
• Track labour use, material needs and daily progress by work area. If materials are short or access is blocked, report the problem early and explain how it affects upcoming tasks. Adjust crew assignments within the agreed plan, while keeping workers on tasks they can carry out safely.
• Prepare for handover by checking open inspection comments and outstanding work. Follow up on corrections, record site changes for drawing updates and organise the relevant installation and test records. With clear records, the next team can understand what the crew completed and what still needs attention.

Duties & Responsibilities – Electrical supervisor jobs Saudi Arabia

An Electrical Supervisor leads site electricians and checks electrical installation work during construction. Daily duties include planning tasks, keeping work safe, checking quality, supporting testing, and keeping clear records of work progress.

• Review electrical drawings and work instructions before assigning tasks to the crew. Ask the site engineer to explain any missing details or information that does not match.
• Assign work to electricians and helpers based on their skills, access to work areas, available materials, and the construction plan.
• Supervise work on cable trays, conduits, cable pulling, panels, lighting, and earthing. Check that routes, supports, and equipment positions match the drawings.
• Explain electrical hazards, safe tool use, and isolation steps to crews. Stop unsafe activities when they occur and report safety concerns to site management.
• Work with civil and mechanical supervisors to avoid conflicts where work meets around equipment foundations, pipe racks, wall openings, and shared service routes.
• Check cables, fittings, and electrical equipment when deliveries arrive at the site. Report any damage, wrong sizes, or shortages before crews start installation.
• Inspect cable terminations, circuit labels, and earth connections. Arrange for crews to correct problems and request quality inspections at the right stages of the work.
• Support authorised testing teams during continuity, insulation resistance, and earthing checks. Record the test results and follow up on any faults.
• Track completed quantities, labour use, delays, and material needs as work moves forward. Give the site engineer clear daily updates on work progress.
• Help resolve outstanding defects and mark changes on drawings for the final records. Complete these tasks before inspection and handover.

Candidate Requirements – electrical supervisor jobs Saudi Arabia

Electrical supervision involves guiding electricians, checking installation quality, and keeping construction tasks safe and organised. Useful skills include turning drawings and site instructions into clear tasks for a crew. Good judgement helps when access, materials, or other trades affect electrical work.

The profile below describes useful capabilities for construction electrical supervision, not confirmed hiring requirements. Candidates can support their applications with clear examples of the teams they have guided, installation problems they have solved, and checks they have completed. These examples are most useful when they explain the task, the action taken, and how the work was checked.

• Read electrical layouts, single-line diagrams, and cable schedules. Recognise drawing revisions and raise questions when site conditions do not match the approved documents.
• Guide electricians through cable pulling, cable tray fitting, panel installation, earthing, and connections. Explain the correct work sequence before tasks begin.
• Plan daily crew tasks around available materials, tools, access, and completed civil work. Spot delays early and report their likely effect on planned tasks.
• Understand safe isolation, electrical hazards, and permit controls. Know when to stop a task and seek advice from the responsible safety or engineering staff.
• Check cable labels, routing, connections, and installation quality. Keep clear notes of defects and follow up on corrective work.
• Coordinate with civil and mechanical supervisors to avoid clashes and protect finished installations. Check shared work areas before starting tasks that could affect another crew.
• Follow test procedures, record results accurately, and help prepare inspection and handover records.
• Give clear toolbox talks, listen to workers’ concerns, and report progress honestly to the site engineer or manager.

Qualifications & Experience – Electrical supervisor jobs Saudi Arabia

Electrical Supervisor work in construction needs practical electrical knowledge and experience leading site crews. An application should explain how the applicant has guided electricians, checked installation quality, and coordinated work with engineers and other trades. Clear examples from projects the applicant has worked on can show how they used these skills on site.

• Training in electrical installation, electrical engineering, or a related trade can provide a useful base for this work. The application should list the applicant’s actual qualifications and explain how they have used that training during site work.
• Experience reading electrical drawings, cable schedules, and single-line diagrams is worth highlighting. A clear example can describe how the applicant spotted a drawing issue and asked the engineer to clarify it before work continued.
• The application should describe the applicant’s background with cable pulling, cable trays, earthing, distribution boards, and equipment connections. It should make clear which tasks the applicant supervised and which tasks they carried out themselves.
• Safety training in electrical isolation, permits to work, and safe testing can help. The applicant should explain their role in checking safety measures before crews started a task, using examples from their site experience.
• Examples should cover assigning daily work, checking progress, recording faults, and preparing inspection records. Experience supporting testing and handover can then show how the applicant helped complete the work and how ready they are to guide work through to completion.

Skills for electrical supervisor jobs Saudi Arabia

Electrical Supervisor work involves guiding electricians, checking installation quality, and keeping electrical tasks safe during construction. Useful technical strengths include reading drawings, understanding cable routes, and spotting faults before they delay testing. Good judgment helps a supervisor separate minor site issues from problems that need an engineer’s decision.

Clear communication matters when electrical work shares space with civil and mechanical activities. A capable supervisor explains tasks in simple steps, checks that workers understand the risks, and gives accurate progress updates. The following skills support daily supervision across building and industrial construction projects:

• Drawing interpretation: Read single-line diagrams, wiring layouts, and cable schedules, and identify differences between drawings and site conditions.
• Installation checks: Check cable trays, conduits, panels, cable terminations, and equipment labels against project drawings.
• Electrical safety: Recognise electrical hazards, check isolation arrangements, and confirm safe access before assigning tasks.
• Testing knowledge: Understand continuity, insulation resistance, and earthing checks, and review test records for unusual results.
• Work planning: Match crew tasks with material availability, access, and the agreed construction sequence.
• Trade coordination: Resolve route clashes with other supervisors before crews install services.
• Team guidance: Demonstrate correct methods and give clear feedback on workmanship.
• Site reporting: Record completed work, defects, material shortages, and issues needing technical review.

Working Conditions & Job Details – Electrical supervisor jobs Saudi Arabia

Electrical Supervisor work on construction projects typically involves coordinating electricians, checking progress and resolving installation issues with engineers. Close contact with civil and mechanical supervisors helps keep cable routes, equipment positions and access areas clear of conflicts.

Before assigning tasks, a supervisor normally reviews current drawings, material availability and the readiness of the work area. Useful checks include cable labels, earthing connections, panel fittings and test records. Clear daily updates help the site team track unfinished work and arrange inspections before crews cover or close installations.

Safety checks are central to this work. Typical controls include checking power isolation, access equipment and suitable protective gear before tasks begin. The supervisor should stop unsafe work and report hazards through site procedures. Careful coordination supports safe installations, fewer corrections and clear records for testing and handover.

How to Apply – Electrical supervisor jobs Saudi Arabia

Application email: career@basmatksa.com.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Jubail jobs.

About the Company

Basmat Company Limited is a Saudi engineering and construction company that says it has worked across Saudi Arabia since 2018. Its stated activities span civil, mechanical, and industrial construction. In particular, the company names oil and gas, petrochemical, power, infrastructure, and industrial settings among the sectors it serves. For civil and structural projects, its listed work includes cutting, filling, embankment work, and foundations for equipment and pipe racks. In addition, Basmat lists precast structures and industrial buildings. However, each project determines the required methods and responsibilities; the company’s public description does not specify them for every assignment. The company says it undertakes construction for oil and gas facilities, petrochemical plants, refineries, water networks, treatment plants,…

Read the Basmat Company Limited company profile for fuller company details and current openings.

Company background

For mechanical work, Basmat lists piping fabrication and erection, HDPE piping systems, steel structures, static equipment installation, and HVAC services. Because facilities differ, the role and technical requirements vary by site, and Basmat does not provide project-level specifications in its public description.

For oil and gas and industrial facilities, Basmat also describes maintenance and project support. It lists manpower deployment and equipment supply as part of this support. Such resources can address practical needs during construction or facility work, but the company does not state staffing numbers, equipment types, schedules, or the scope at a particular site.

For example, Basmat highlights pipe-rack and equipment foundations, earthworks, road marking, and asphalt modification among its activities. These examples show selected activities, not the scope of every project. The company describes its approach as safety-focused and based on disciplined site execution, but the available information does not identify a safety certification or measured result.

Together, the stated services cover site preparation, structures, mechanical work, and project support across several named sectors.

Company website: https://www.basmatksa.com/