Mechanical Engineer

Mechanical engineer jobs Saudi Arabia: This Mechanical Engineer vacancy is based in Jubail, Saudi Arabia, in the Oil & Gas sector.

Job description

A Mechanical Engineer in oil and gas construction helps turn technical drawings into safe, correctly installed mechanical systems. The work typically connects engineering plans with site activities, material checks, inspections, and testing. It involves understanding how piping, equipment, supports, and related parts fit together within an industrial facility. The engineer helps site teams solve technical problems before they cause poor installation or delays. A key outcome is clear, accurate work that follows the project drawings and specifications and gives the client reliable records for review and handover. Relevant experience can help an engineer recognise common site problems, assess proposed solutions, and explain technical needs to supervisors and construction crews. Useful examples include handling drawing changes, checking equipment installation, following up on material issues, and supporting inspections. The practical scope below describes typical mechanical engineering work in these settings; the project assignment determines the exact systems and responsibilities.

Mechanical engineer jobs Saudi Arabia – Safety and quality practices

A normal work stage starts with reviewing drawings, technical specifications, and the planned order of installation. The engineer checks dimensions, connection points, material details, and space for access or maintenance. Comparing mechanical drawings with civil, structural, and electrical drawings can reveal problems early. For example, a pipe route may conflict with a steel member, or an equipment connection may not match the planned piping position. The engineer records the issue, seeks clarification from the right person, and helps the site team follow the agreed solution rather than make an unsupported change. During construction, the role often involves close contact with supervisors, quality inspectors, material staff, and other engineers. Checks may cover delivered items, equipment foundations, pipe supports, installation positions, and access for lifting or assembly. The engineer compares site progress with the work plan and identifies technical issues that could hold up the next activity. Clear communication matters when several trades share one work area. A useful site update explains what crews have completed, what remains open, and what decision or material they need to continue correctly.

Practical work stages

As installation moves towards testing and handover, the focus shifts to proving that the work meets the agreed technical scope. Typical support includes checking readiness for inspections, reviewing test records, and following up on incomplete or faulty items. The engineer helps keep drawings and reports consistent with the actual installation. This gives the project team a clear record of changes and outstanding work. Attention to safety remains important throughout, especially around lifting, pressure testing, temporary supports, and work near existing plant systems.

• Review the latest drawing revision before discussing work with site crews. Check equipment tags, pipe sizes, connection details, and reference notes. Raise unclear or conflicting information through the project’s technical query process so crews have a clear basis for installation.

• Compare incoming mechanical materials with approved documents and delivery records. Typical checks include size, material grade, quantity, condition, and identification marks. Report damaged, incorrect, or untraceable items before the site team uses them in the work.

• Check installation readiness with the relevant teams. For equipment, this may include foundation dimensions, anchor bolt positions, access routes, and space for maintenance. For piping, it may include support locations, route clearance, and available connection points.

Role-specific work processes

• Follow mechanical installation progress against the planned sequence. Identify missing materials, unresolved drawing questions, or unfinished supporting work. Give supervisors specific technical information so they can plan the next activity without overlooking important checks.

• Coordinate shared work areas with civil, structural, electrical, and instrumentation teams. Discuss clashes and access needs before crews proceed. Keep a record of agreed actions, especially where one trade’s work affects equipment alignment, piping routes, or maintenance access.

• Support quality inspections by checking that the work area and records are ready. Review dimensions and installation details within the assigned scope. Help the construction team understand inspection comments and correct faults before requesting another check.

• Assist with preparation for mechanical tests where the assignment includes them. Check the test scope, boundaries, instruments, and supporting documents with the responsible team. Follow site safety controls and report any condition that could affect a safe test.

• Prepare clear progress notes and handover records. Track open technical points, inspection results, site drawing changes, and remaining corrections. Use precise descriptions and equipment references so another engineer or client reviewer can understand the status without guessing.

Duties & Responsibilities – Mechanical engineer jobs Saudi Arabia

Mechanical Engineer duties in oil and gas construction usually include technical checks, coordination with site teams, and support during installation. This work helps site teams follow project drawings, solve mechanical problems as they arise, and keep clear records of the activities they complete.

• Review mechanical drawings and project specifications before work starts. Identify details that need more explanation and ask the project engineer technical questions about them.
• Check piping routes, equipment positions, and space for access against actual site conditions. Report any clashes with structures, cables, or other services at the site.
• Help plan installation tasks by checking whether materials are available, the status of drawings, access needs, and how the tasks connect with other construction activities.
• Check pipes, fittings, valves, and equipment when they arrive against the approved material lists. Record any damage, missing items, or differences so the team can review them.
• Monitor piping fabrication and installation when the project includes this work. Check that dimensions, supports, and alignment match the project drawings.
• Coordinate equipment installation with supervisors and lifting teams. Before installation begins, confirm that foundations are ready and review the details for fixing equipment in place.

Main responsibilities

• Work with quality inspectors to arrange checks and record what they find. Follow up on repairs or corrections before closing inspection points.
• Support pressure testing and mechanical checks by reviewing the preparation work, checking the limits of the test area or system, and recording results with the responsible team.
• Discuss task risks with site supervisors and safety staff. Pay special attention to risks around lifting, pressure testing, and nearby equipment that is operating.
• Keep progress records, drawing changes, and lists of work that remains up to date. Use these records to support handover and document control.

Candidate Requirements – mechanical engineer jobs Saudi Arabia

Mechanical Engineer work in oil and gas can involve checking technical details, supporting installation teams, and solving mechanical problems during construction. A useful candidate profile combines sound engineering knowledge with practical site judgement. Clear communication helps engineers explain drawing details, raise concerns early, and agree on next steps with supervisors, inspectors, and other engineering teams. The points below describe useful abilities for this type of role, rather than additional confirmed hiring requirements. Candidates can support their applications with clear examples of their own work, decisions, and project results.

• Read mechanical drawings and specifications carefully, and recognise when site work does not match the latest approved details.
• Understand common piping and equipment installation methods, including how alignment, supports, and access affect safe construction and later maintenance.
• Explain technical issues in simple terms so site crews and other project teams can act without confusion.
• Check measurements and material details accurately, and keep clear notes that help teams trace changes or resolve questions.
• Approach faults step by step, compare possible causes, and seek technical advice when a solution needs further review.
• Plan tasks around material availability and related construction work, while raising delays before they affect other teams.
• Take safety concerns seriously and recognise when an unsafe condition needs prompt attention.
• Describe personal project contributions honestly, separating individual responsibilities from the wider team’s achievements.

Qualifications & Experience – Mechanical engineer jobs Saudi Arabia

Mechanical engineering work in oil and gas involves understanding technical drawings, equipment needs, and site construction methods. The stated requirement is a minimum of 5 years of relevant experience in oil and gas, industrial construction, or contracting projects, as applicable to the position. When presenting your background, give project dates, explain your own role, and describe the mechanical work you handled. The points below can help you present relevant experience; they are not additional hiring requirements.

• Describe experience with piping, equipment installation, or other mechanical construction work where relevant. State whether you supported planning, site work, inspection, or handover, and explain the tasks you completed.
• Give examples of reading mechanical drawings and checking material specifications. Explain how you found a difference between drawings and site conditions, checked an incorrect material, or raised a technical question before work continued.
• Highlight experience coordinating with site supervisors, contractors, and inspection teams. Show how you helped resolve a mechanical issue or prepared a task for the next stage of construction.
• Training in mechanical engineering subjects, drawing interpretation, and construction quality checks can help build useful technical knowledge. If you have completed relevant courses, explain how you used that learning at work.
• Include practical learning in site safety, installation checks, and technical records. Examples of preparing inspection requests, progress updates, or handover documents can show how you supported safe, organised mechanical work.

Skills for mechanical engineer jobs Saudi Arabia

Mechanical engineering work in oil and gas involves reading technical information, checking mechanical work, and solving site problems. Useful skills link drawings, material details, and installation checks. These skills help site teams spot errors before they affect safety, quality, or progress. Practical strengths for this work include making sound technical decisions and communicating clearly with supervisors, inspectors, suppliers, and other engineers. The following skills support common mechanical engineering tasks in these settings:

• Drawing interpretation: Read piping layouts, equipment drawings, and dimensions; identify differences between drawings and site conditions.
• Material checking: Compare pipe sizes, material grades, fittings, and equipment details with project documents; report any differences for review.
• Installation knowledge: Understand pipe supports, equipment alignment, space around equipment, and access needs during mechanical installation.
• Quality awareness: Record inspection findings clearly and track corrections against agreed technical instructions.
• Problem-solving: Investigate problems with how parts fit together or line up, and explain practical options for review.
• Safety judgement: Recognise mechanical hazards and raise concerns before work continues.
• Document control: Use current drawing revisions and keep technical records easy to trace, with clear dates and drawing numbers.
• Team coordination: Explain site issues clearly and agree follow-up actions with the people involved.

Working Conditions & Job Details – Mechanical engineer jobs Saudi Arabia

Mechanical Engineer work in oil and gas or industrial construction typically involves close coordination with site supervisors, inspectors, construction crews and other engineers. Clear updates help teams agree on work steps, resolve drawing questions and avoid clashes between piping, equipment and nearby structures. Before work starts, the engineer usually checks the latest drawings, material details and site readiness with the people responsible. During installation, routine checks may cover equipment alignment, piping connections and access for maintenance. The engineer records technical issues and follows up on agreed corrections before the next stage proceeds. Safety discussions form part of this coordination, especially around lifting, pressure testing and work near operating equipment. Engineers raise concerns with the relevant safety and site staff rather than making assumptions. Accurate inspection records and clear handover notes help the next team understand what is complete and what still needs attention.

How to Apply – Mechanical engineer jobs Saudi Arabia

Application email: career@basmatksa.com. Send your application to the employer email address shown above. Looking for other roles in this area? Browse Jubail jobs.

About the Company

Basmat Company Limited is a Saudi engineering and construction company that says it has worked across Saudi Arabia since 2018. Its stated activities span civil, mechanical, and industrial construction. In particular, the company names oil and gas, petrochemical, power, infrastructure, and industrial settings among the sectors it serves. For civil and structural projects, its listed work includes cutting, filling, embankment work, and foundations for equipment and pipe racks. In addition, Basmat lists precast structures and industrial buildings. However, each project determines the required methods and responsibilities; the company’s public description does not specify them for every assignment. The company says it undertakes construction for oil and gas facilities, petrochemical plants, refineries, water networks, treatment plants,…

Read the Basmat Company Limited company profile for fuller company details and current openings.

Company background

For mechanical work, Basmat lists piping fabrication and erection, HDPE piping systems, steel structures, static equipment installation, and HVAC services. Because facilities differ, the role and technical requirements vary by site, and Basmat does not provide project-level specifications in its public description. For oil and gas and industrial facilities, Basmat also describes maintenance and project support. It lists manpower deployment and equipment supply as part of this support. Such resources can address practical needs during construction or facility work, but the company does not state staffing numbers, equipment types, schedules, or the scope at a particular site. For example, Basmat highlights pipe-rack and equipment foundations, earthworks, road marking, and asphalt modification among its activities. These examples show selected activities, not the scope of every project. The company describes its approach as safety-focused and based on disciplined site execution, but the available information does not identify a safety certification or measured result. Together, the stated services cover site preparation, structures, mechanical work, and project support across several named sectors. Company website: https://www.basmatksa.com/