Mechanical Technician

New

I City Services

📍 Doha, Qatar 📅 Posted today 🔎 Ref: #35565
💼 Full Time 💰 QAR Negotiable
Review this Technician Jobs opportunity before applying Confirm the role, company, location, requirements and application method shown on this page for Mechanical Technician.
💼 Job TypeFull Time
📍 LocationQatar
🏙 CityDoha
🪪 NationalityAny Nationality
💰 SalaryQAR Negotiable
👥 GenderMale
🏭 Company IndustryTechnician Jobs
📄 Experience5 Years
📅 Posted DateToday
Advertisements

Explore mechanical technician jobs in Qatar. This Mechanical Technician vacancy is based in Doha, Qatar, in the Facility Management sector.

Job description

In facility management, Mechanical Technician work helps keep building equipment safe, reliable and efficient. The role covers mechanical operations, preventive and corrective maintenance, troubleshooting, repairs and servicing across facility management and operation and maintenance projects. In particular, the technician works on heating, ventilation and air-conditioning (HVAC) systems, pumps, motors, plumbing systems, valves, piping networks and other mechanical equipment. The main purpose is to maintain equipment performance, support reliable building services and reduce breakdowns that maintenance can prevent. This position draws on extensive technical experience in the facility management sector and strong practical knowledge of mechanical systems.

The work includes both preventive and corrective maintenance. Preventive maintenance means checking and servicing equipment before a fault stops it from working. In contrast, corrective maintenance means finding the cause of a problem and repairing it. Both types of maintenance involve careful checks and suitable repair methods. Clear records also help the team track equipment condition and service quality. A pump, for example, may still run while making an unusual noise or supplying less water than normal. A careful inspection can help identify the problem before it affects other parts of the building. Planned servicing and timely repairs support safe operation and help maintain system reliability.

Mechanical technician jobs Qatar – Safety and quality practices

A typical maintenance task starts with a review of the reported problem, available equipment history and planned work. The technician then checks the system and identifies which parts need attention. Signs of trouble include leaks, loose parts, vibration, unusual heat and changes in pressure or flow. These checks help explain both the visible signs of a fault and its possible cause. For example, replacing a worn part alone may not solve the problem if poor alignment, a blocked line or another system fault caused the damage. Comparing operating readings with the equipment's guidance can help separate normal conditions from signs of a developing fault.

Advertisements

Repair work involves more than removing old parts and fitting new ones. It includes protecting nearby equipment, controlling risks and following health, safety and operating standards. After a repair, checks should confirm that the equipment works safely and performs correctly with the rest of the system. Maintenance may affect the water supply, cooling or other building services, so coordination with others is important. Clear updates help supervisors and other maintenance staff plan related tasks and avoid restarting equipment too early. Any faults found during the work should be reported clearly, including those that need further checks or attention from another trade.

Team coordination and communication

Good service quality depends on careful work and accurate information. In particular, useful maintenance records include inspection findings, repairs, parts used and any work that still needs attention. These details help the maintenance team identify repeated faults and plan future servicing. Identifying leaks, poor flow and equipment that runs without giving the expected result also supports operational efficiency. The aim is to keep mechanical systems dependable, not simply to get a faulty unit running again. The following practical activities explain the main responsibilities. Specific checks and repair methods depend on the equipment, the agreed work and relevant safety procedures:

  • Inspect mechanical equipment during routine checks. Look for wear, corrosion, loose fittings, damaged supports and signs of leaks. Compare the equipment's current condition with earlier findings when records are available. Identify faults that need prompt attention and those that can be included in planned maintenance. Then, note the equipment location and symptoms clearly so the team can find and assess the problem.

Practical work stages

  • Service HVAC equipment using checks that suit the system and the maintenance plan. Typical work can include inspecting filters, belts, bearings, fans and safely accessible connections. Check for unusual noise or vibration, and report problems that may reduce airflow, cooling performance or reliability. Where relevant, check drainage for blockages or leaks that could affect equipment operation or nearby areas.
  • Check pumps and motors for signs of mechanical problems. Inspect mountings, couplings, seals and connections within the assigned work. When a pump supplies less water or makes noise, examine possible causes rather than assuming that the motor or pump needs replacement. For instance, checks may include looking for leaks, loose supports or restricted flow. Keep electrical testing and repairs within the appropriate trade's work.
  • Trace plumbing and piping faults carefully to find the source of the problem. Follow the affected line, check visible joints and inspect valves for leaks or poor operation. Identify the section that needs repair and coordinate any break in service before opening pipework or removing parts. After repairs, check the affected joints and confirm that flow has returned without new leaks.

Daily work and practical tasks

  • Carry out corrective repairs using suitable tools, replacement parts and repair methods. Typical tasks may include changing worn seals, tightening loose fittings or replacing damaged mechanical parts. Check that replacement parts match the equipment, and avoid changes that could cause further problems during operation. Use equipment instructions where available to guide fitting, adjustment and servicing, rather than relying only on how the old part was installed.
  • Coordinate maintenance activities with supervisors and other technicians. Confirm which equipment needs work, what access is needed, which parts are suitable and whether related tasks affect the repair. When work involves another trade, coordinate with that team so everyone understands the task and safe order of work. Report delays or additional faults that may change the planned return to service.
  • Follow health, safety and operational standards throughout inspection, servicing and repair work. Before opening equipment, follow the applicable isolation procedure and check for pressure, movement, hot surfaces or other stored energy. Switching equipment off may not remove every risk. Keep the work area tidy, protect open equipment from dirt and report unsafe conditions before continuing with the task.

Daily role activities

  • Test equipment after maintenance and record the results. Look for leaks, unusual vibration and signs that the original fault remains. Check that removed guards and covers are back in place before normal operation. Note useful operating readings, describe the repair clearly and report unresolved problems. These checks and records support further action, reliable system performance and consistent maintenance service quality.

Duties & Responsibilities – Mechanical technician jobs Qatar

A Mechanical Technician keeps building systems safe, reliable and efficient. The work includes routine checks, finding faults, making repairs and servicing mechanical systems and equipment across facility maintenance and operation projects.

  • Inspect HVAC systems, pumps, motors and other mechanical equipment. For example, look for signs of wear, leaks and overheating, and check for unusual noise or vibration.
  • Carry out preventive maintenance by cleaning components, lubricating moving parts and checking belts, bearings and connections. Follow the equipment service instructions when carrying out these tasks.
  • Find mechanical faults by checking equipment visually, reviewing operating readings and using suitable test tools. Identify what caused the fault before choosing how to repair it.
  • Repair or replace worn mechanical parts, then test the equipment to make sure it runs correctly. Then, return it to service only after confirming that it works properly.
  • Service HVAC equipment and check its airflow, drainage and mechanical components. These checks help maintain steady cooling and keep the equipment running reliably.
  • Check plumbing systems, valves and piping networks. Find the source of leaks and clear blockages where appropriate, then check the connections after completing repairs.

Safety and quality practices

  • Coordinate maintenance work with supervisors and other technicians. In particular, plan access to equipment and any equipment shutdowns to reduce disruption to people who use the building.
  • Follow site safety procedures and isolate equipment before starting work. Use suitable protective equipment and the right tools for each task.
  • Record inspection findings, repairs, replacement parts and test results. Keep these records so the maintenance team can track the condition of the equipment.
  • Report faults that happen repeatedly, unsafe conditions and any drop in equipment performance. Suggest practical maintenance actions to improve reliability and the quality of service.

Candidate Requirements – mechanical technician jobs Qatar

Mechanical Technician work in facility management calls for extensive technical experience in mechanical operations, preventive and corrective maintenance, troubleshooting, repairs and equipment servicing. The role focuses on keeping mechanical systems safe, reliable and efficient across facility management and operation and maintenance projects.

The work covers heating, ventilation and air-conditioning (HVAC) systems, pumps, motors, plumbing systems, valves, piping networks and other mechanical equipment. Key tasks include routine inspections, finding mechanical faults, repairing equipment and coordinating maintenance activities. The role also involves following health, safety and operational standards, with a focus on equipment performance, system reliability, efficient operation and service quality.

Useful working methods include checking equipment condition, following service instructions and recording repair results. Preventive maintenance helps address wear before a breakdown, while corrective maintenance deals with faults found during inspections or reported by building users.

  • A careful approach to inspections helps you notice leaks, unusual noise, vibration or reduced performance. Checking pipe joints, valve connections and pump seals during routine rounds can help locate problems before equipment stops working.

Relevant experience and ability

  • Clear fault-finding methods help you check possible causes in a sensible order. For example, comparing pressure, temperature or flow readings with equipment guidance, where relevant, can help locate a fault and avoid replacing parts that still work.
  • Maintenance instructions and equipment manuals guide correct servicing, parts selection and adjustments. For HVAC systems, checks of filters, belts and condensate drains, where fitted, can help identify blocked airflow, wear or drainage problems.
  • Practical repair methods help restore equipment after a fault. Then, checking for leaks, secure connections, normal readings and unusual noise after repair helps confirm that the problem has been resolved and the equipment can operate safely.
  • Good planning helps you organise tools, parts and access before maintenance starts. Reviewing planned servicing alongside urgent repairs helps the team decide which tasks need attention first and limit disruption to building services.
  • Clear communication helps supervisors and technicians coordinate repairs, especially when work on pumps, valves or piping affects connected building systems. For instance, sharing the fault location, affected equipment and repair progress helps other team members plan their work.

Team coordination and communication

  • Accurate maintenance records help the team track inspection findings, readings, faults, completed repairs and follow-up checks. Recording replaced parts and problems that remain unresolved also helps with later servicing and the review of repeated equipment faults.
  • Sound safety judgement supports safe equipment isolation and checks before work begins. Moving parts, hot surfaces and trapped pressure need careful attention during mechanical maintenance. Reporting tasks beyond your training or authority helps prevent unsafe repairs and protects others nearby.

Qualifications & Experience – Mechanical technician jobs Qatar

Mechanical Technician work calls for extensive technical experience in facility management. This includes mechanical operations, preventive maintenance, corrective maintenance and finding faults. In particular, relevant experience should cover HVAC systems, pumps, motors, plumbing systems, valves and piping networks. This work needs careful attention to safe operation, reliable equipment and the quality of maintenance services.

  • A description of hands-on experience with building mechanical systems should include clear examples of equipment inspected, serviced or repaired. These examples should explain the work carried out and how the technician checked the equipment’s performance afterwards.
  • Examples of finding faults should explain how the technician identified a problem before choosing a repair. For instance, relevant tasks include tracing leaks, checking unusual pump noise, investigating poor airflow and identifying worn mechanical parts.
  • Details of planned maintenance should cover work such as following service schedules, checking the condition of equipment and recording findings. These details should explain how the work helped reduce breakdowns or stop the same faults from happening again.
  • Experience in coordinating repairs should describe work with supervisors and other technicians. Relevant tasks include arranging access to equipment and reporting equipment problems that need further attention, as well as coordinating the repair work itself.
  • Practical training in mechanical maintenance, HVAC servicing, plumbing or pump repair can support this work. Learning to read technical drawings and service manuals is helpful when working on these mechanical systems and equipment.
  • Details of relevant safety training should sit alongside examples of practical safety experience. These examples should cover equipment isolation, safe tool use and site maintenance procedures, showing how the technician followed these practices during maintenance work.

Skills for mechanical technician jobs Qatar

A Mechanical Technician in facility management needs good practical knowledge of mechanical systems and how these systems work together. Good technical judgement helps the technician find faults, choose the right repairs and keep equipment running safely and reliably. The job includes the operation and maintenance of HVAC systems, pumps, motors, plumbing, valves and piping networks.

Careful checks and clear communication help the technician carry out both planned servicing and urgent repairs. Key skills include spotting early signs of failure, explaining faults to maintenance colleagues and checking equipment performance after finishing a repair. During these tasks, the technician must pay close attention to safety and the quality of service.

  • Mechanical troubleshooting: Find possible faults from signs such as unusual noise, vibration, leaks or low equipment output.
  • HVAC knowledge: Understand airflow, mechanical parts and common problems that can make HVAC systems work less well.
  • Pump and motor servicing: Spot wear, poor alignment and overheating, and choose suitable ways to check pumps and motors.
  • Plumbing and pipework skills: Find where leaks come from, check how valves work and spot problems that limit water flow.
  • Maintenance planning: Use service instructions and inspection results to plan and organise preventive and corrective maintenance tasks.
  • Repair accuracy: Choose suitable tools and parts for each repair, check fittings and test how the equipment works after repairs.
  • Safety awareness: Follow isolation procedures, spot risks from pressure and report unsafe equipment before starting work.
  • Team coordination: Share clear reports about faults, keep records of finished repairs and agree with colleagues on which maintenance tasks need attention first.

Working Conditions & Job Details – Mechanical technician jobs Qatar

Work in a Mechanical Technician role in facility management usually involves working closely with supervisors, other technicians and building users. Teams plan preventive maintenance and urgent repairs around access to equipment and service needs. During handovers, technicians clearly explain faults, completed repairs and work that still needs attention on HVAC equipment, pumps, motors and plumbing systems.

Before starting a task, technicians check the reported problem and review maintenance records. Next, where needed, they confirm that they have safely isolated the equipment from its energy supply. They follow health and safety procedures, use suitable protective equipment and keep the work area clear. When tasks involve pressure, moving parts or electrical connections, technicians carry out careful checks and work with the relevant trade team.

After repairs, technicians test the equipment to check how it works and look for leaks, unusual noise or vibration. Next, they record their findings, report faults that remain and tell the supervisor about the equipment’s condition. These checks help equipment run safely and reliably, reduce repeat faults and limit breaks in service.

How to Apply – Mechanical technician jobs Qatar

Application email: hr@icity.qa.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Doha jobs.

About the Company

I City Services in Qatar I City Services is a Doha-based, 100% Qatari-owned company. Its published services in Qatar cover facilities management and hospitality staffing. These are separate areas of work. Facilities management covers property upkeep and building systems, while hospitality staffing supplies front-of-house and kitchen professionals for hotels, cafés and restaurants. Facilities management services I City lists maintenance for heating, ventilation and air-conditioning, electrical systems, plumbing and drainage, and building management systems. It also describes preventive maintenance. As general industry context, planned maintenance can help property operators organize upkeep and address building-system needs. The available information does not say that every service applies to every property. The agreed scope determines the work included. The…

Read the I City Services company profile for fuller company details and current openings.

Company background

I City identifies several settings for its facilities management services: commercial offices and business towers, residential towers and compounds, hotels and hospitality facilities, retail outlets, malls and restaurants. It also names schools and universities, healthcare clinics, and government and education facilities. These properties serve different users and have varied operating patterns. The available information does not describe one plan for every site.

Hospitality staffing and service practices

Hospitality staffing is a separate part of I City’s published offering. The company says it supplies trained front-of-house and kitchen professionals to hotels, cafés and restaurants. These roles support guest service and food operations, while facilities management focuses on property upkeep and systems. The information provided does not specify job titles, staffing numbers or assignment terms.

I City says its facilities work uses trained personnel, preventive maintenance programmes, performance indicators, and quality, health, safety and environment systems. As general context, these tools can help teams plan tasks and review service performance; no client-site results are provided. The company lists ISO 9001, ISO 14001, ISO 45001 and ISO 22000 certifications, relating to quality, environmental management, occupational health and safety, and food safety. It also states a commitment to long-term partnerships and sustainable development aligned with Qatar National Vision 2030.

Company website: https://www.icity.qa/

Similar Jobs You May Be Interested In

View all jobs
Apply safely for Mechanical Technician Do not pay for an application, interview or job offer. Verify unusual requests before sharing sensitive personal or financial information.
Contact Support
Advertisements