QA/QC Engineer

QA/QC Engineer jobs Qatar: This QA/QC Engineer vacancy is based in Doha, Qatar, in the Oil & Gas sector.

Job description

A QA/QC Engineer in the oil and gas pipeline sector checks that materials, construction work and quality records meet project specifications. The vacancy calls for at least five years of experience in oil and gas with pipeline sector experience. This experience supports work where small errors in choosing materials, welding, coating or testing can affect pipeline safety and how long a pipeline lasts. The role combines quality assurance, which helps prevent defects, with quality control, which checks whether the work meets the required standards.

Typical pipeline quality work starts before construction begins. For example, the engineer reviews drawings, specifications, inspection and test plans, and work procedures to understand the project requirements. These documents explain what the team needs to check, when inspections take place and who must approve the work before it continues. This early review helps the site team find unclear instructions or missing inspection steps before construction starts. It helps engineers, supervisors and inspectors agree on acceptance criteria: the limits that the work must meet to pass each check.

QA/QC Engineer jobs Qatar – Daily work and practical tasks

During construction, the QA/QC Engineer checks the quality of materials and site work at each stage. For example, depending on the work that the pipeline project covers, checks may include pipe deliveries, fit-up, welding, non-destructive testing, coating repairs, lowering-in and pressure testing. The engineer compares inspection results with the relevant drawings and specifications instead of judging quality by appearance alone. Clear identification details link each pipe section or weld to its material certificate and inspection history. As a result, these links let the team trace the records and find the correct item if a test shows a problem.

When work does not meet the project criteria, the engineer records the problem and follows the agreed process to correct it. A clear quality report gives the location, describes the defect and lists the relevant specification and evidence. The construction team can then suggest a repair or another action to correct the problem for review. Then, the engineer follows up on further inspections and checks that the records show enough evidence to close the issue. This process helps prevent the same problem in other pipeline sections and reduces repair work that the team could avoid later.

Work stages and responsibilities

In the final stages, the engineer focuses on evidence that the completed work meets the project scope. The engineer checks inspection reports, test results, repair records and items that still need attention before putting together the quality handover file. Clear records allow the client or review team to follow the work from the arrival of materials through to final acceptance. The activities below describe common pipeline QA/QC practice, but the exact inspection scope and approval steps depend on each project. Throughout the work, the aim is to give the project team clear evidence of quality, rather than simply collect forms with signatures.

• Review quality documents before each activity starts. For instance, compare the inspection and test plan with the planned order of construction work. Identify points that need inspection or approval, and check that supervisors understand when to request a quality visit. Raise questions about unclear acceptance criteria before they delay work on site.

Role-specific work processes

• Check incoming pipes, fittings, flanges and valves against the delivery documents and project specifications. In particular, look for damage, missing markings or differences in size and material grade. Match the identification numbers on items with their material certificates, and record any items that need further review before the team uses them.

• Follow welding quality from preparation through to completion. Typical checks cover joint fit-up, cleanliness, use of the correct welding procedure and welder identification. Record weld numbers clearly so the team can link each joint to its inspection results and find details of any repairs that take place later.

• Coordinate non-destructive testing with the inspection team and site supervisors. Then, check that each report refers to the correct welds and compares the results with the stated acceptance criteria. Next, track rejected joints, repair work and repeat testing so the quality record continues to show any defects that still need attention.

• Inspect coating and pipeline protection activities within the assigned scope of work. These checks may include surface preparation, coating condition, thickness checks and holiday testing, which finds gaps in the coating. Where the project inspection plan requires it, check repairs before the team covers or lowers the pipe.

Practical work stages

• Review readiness for pressure testing with the construction and testing teams. In particular, check the test package, inspection status, equipment calibration records and any quality items that still need attention. During testing, record the relevant results and observations. Then compare this information with the approved test procedure and its acceptance limits.

• Manage non-conformance records using clear facts and evidence to support them. Describe what failed, track the agreed action and arrange an inspection to check the work afterwards. Review repeated defects with the site team to find causes, such as poor handling, unclear instructions or missed checks, and support practical steps to prevent them.

• Build the handover file as work progresses instead of waiting until the work is complete. Keep material certificates, weld records, inspection reports and test results in an organised system. Check for missing signatures, incorrect references and items that remain open so reviewers can assess the completed pipeline work without delays that the team could avoid.

Duties & Responsibilities – QA/QC Engineer jobs Qatar

QA/QC Engineer duties in oil and gas pipeline work typically cover material checks, welding quality, testing and inspection records. The aim is to find defects early and show that completed work meets project specifications.

• Review pipeline drawings, quality procedures and inspection plans before work starts. Next, identify checks that need client or inspector approval.
• Check incoming pipes, fittings, valves and welding materials against approved documents. Then, record damage, missing certificates or differences in material identification.
• Track pipe numbers, heat numbers and material certificates so crews can link each installed item to its quality records.
• Check joint preparation, pipe alignment and welding activities against approved welding procedures. Review welder qualification records for the planned work.
• Coordinate non-destructive testing with inspection teams. Then, review reports, track weld defects and arrange further checks after repairs.
• Inspect surface preparation, coating application and coating repairs. Record thickness readings and checks for gaps or damage in protective coatings.
• Review pressure test packs and gauge calibration records. Next, witness pipeline tests and document results against the agreed acceptance limits.
• Raise non-conformance reports for quality failures. Discuss corrective actions with site engineers and check repair results before closing reports.
• Maintain inspection requests, weld maps and test reports. Finally, compile clear handover records that help the project team confirm pipeline quality.

Candidate Requirements – QA/QC Engineer jobs Qatar

A QA/QC Engineer in the Oil & Gas pipeline sector benefits from a careful approach to inspections, test records and site quality checks. A useful candidate can compare completed work with drawings and project specifications, explain quality concerns clearly and follow up until the team resolves them.

The points below describe useful abilities for pipeline quality work rather than additional hiring conditions. Applicants can strengthen their profile with clear examples of pipeline inspections, quality reporting and problem-solving from previous projects.

• Read pipeline drawings, inspection and test plans, and technical specifications. Recognise the checks needed before work moves to the next stage.
• Understand how teams track pipes, fittings and welding materials. For instance, match material certificates and identification marks to the items at site.
• Bring practical knowledge of welding inspections and non-destructive testing records. Notice missing details and raise questions with the responsible inspection staff.
• Understand coating checks and how damage can affect pipeline protection. Record defects clearly so site teams can arrange repairs and further checks.
• Show familiarity with pressure test documents, including test limits, equipment records and results. Check that records support the stated acceptance criteria.
• Keep inspection reports accurate and easy to trace. For example, link findings to locations, drawings, dates and supporting evidence.
• Discuss quality issues calmly with engineers, supervisors and inspectors, while keeping safety and technical standards in view.
• Follow up on non-conformance reports and corrective actions, checking evidence before recommending closure.

Qualifications & Experience – QA/QC Engineer jobs Qatar

QA/QC Engineer work in oil and gas pipelines draws on experience with site inspections, material checks and quality records. The stated requirement is 5 years of experience in oil and gas within the pipeline sector. In your application, give the dates of your relevant work, describe the pipeline projects you have supported and explain your own part in checking quality, recording results and resolving defects. The examples below can help you describe your experience; they are not additional employer requirements.

• Highlight relevant pipeline inspection experience. Useful examples include checking pipe identification, reviewing material certificates and comparing site work with approved drawings and project specifications.
• Describe any work with welding inspection and non-destructive testing records. In particular, explain whether you checked reports, tracked test results or followed up on repairs and repeat tests.
• Include experience with pressure testing, coating checks or pipeline installation records where it applies. State your actual level of involvement rather than listing activities you only observed.
• Training in quality management, inspection and test plans, welding inspection or pipeline testing can help build knowledge for this work. However, present any completed courses accurately, without suggesting that training replaces the stated experience.
• Show experience preparing inspection reports, tracking quality issues and organising handover files. Clear examples of coordinating with site engineers, inspectors and testing teams can help explain your background and how you followed quality issues through to closure.

Skills for QA/QC Engineer jobs Qatar

A QA/QC Engineer working in the oil and gas pipeline sector checks quality at each stage, from receiving materials to the final inspection. Useful technical skills include reading pipeline drawings, understanding inspection plans and comparing results from the site with project specifications to check that the work meets them.

Clear communication helps an engineer explain defects, agree on steps to correct them and keep accurate inspection records. When test results fall outside accepted limits, careful judgement helps the engineer decide what action to take. The skills below support typical pipeline quality work and help teams find and solve problems before those problems affect later stages of construction.

• Drawing interpretation: Read pipeline layouts, isometric drawings and weld details, then check that the installation matches the approved documents.
• Material traceability: Match pipe markings, heat numbers and material certificates with the details in inspection records.
• Welding quality checks: Understand welding procedures, welder qualifications and the points to check during a visual inspection.
• Test report review: Read non-destructive testing reports and follow up on any defects that need repair.
• Pressure testing knowledge: Review test packs, records of gauge calibration and pressure test results as part of pipeline quality checks.
• Quality documentation: Maintain inspection requests and checklists, and keep clear records of the checks the team has completed.
• Problem-solving: Record non-conformances, discuss their likely causes and track corrective actions until the team completes them and closes each issue.
• Site coordination: Explain quality concerns clearly to supervisors, inspectors and construction crews so that they understand the issues.

Working Conditions & Job Details – QA/QC Engineer jobs Qatar

A QA/QC Engineer in oil and gas pipeline work typically coordinates inspections with construction engineers, welding teams, testing staff and client inspectors. Clear communication helps teams arrange checks before work moves to the next stage and resolve quality concerns without losing track of progress.

Daily coordination may include checking pipe identification, reviewing weld records and comparing inspection results with project specifications. The engineer tracks open quality issues, agrees on corrective steps with the responsible team and checks evidence before closing each issue. Accurate records help teams trace materials and show which pipeline sections meet the acceptance criteria.

Inspection planning should account for safe access, lifting activities, welding and pressure testing. The engineer coordinates with site safety staff before entering active work areas. Timely checks and clear handover records support safe construction, reduce repeat work and help the project team prepare complete quality documents.

How to Apply – QA/QC Engineer jobs Qatar

Application email: career@ammico.biz.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Doha jobs.

About the Company

Ammico International Contracting Co. works in geotechnical engineering, foundation construction, ground improvement and marine works. According to its website, Ammico has more than 50 years of international experience and operations in Qatar, Saudi Arabia and the United Arab Emirates. In Qatar, the website identifies the local entity as Ammico International Contracting & Trading Co. W.L.L., with a postal address in Doha. Foundation engineering is a central area of Ammico’s published services. The company lists bored cast-in-situ piling, diaphragm walls, shoring, earth retention systems, ground anchors, micro piling and dewatering. For example, these methods can support foundations or retain ground beside deep excavations. Project teams select suitable methods based on engineering design, site investigations and surrounding…

Read the Ammico International Contracting Co. company profile for fuller company details and current openings.

Company background

Ammico lists vibro compaction, stone columns, grout columns, rigid inclusions, rapid impact compaction and dynamic replacement among its ground improvement methods. In general, these techniques can help address challenging soil conditions. However, their suitability depends on project specifications and ground investigations. Ammico’s published projects include rigid inclusion works at Rua Al Madinah in Saudi Arabia and stone column works at Business Bay in Dubai.

Marine construction is another documented service area. Ammico lists marine piling, jetty and dolphin construction, sheet piling, dredging and shoreline protection. Its Old Doha Port marine facility project in Qatar included boat ramp and marina pontoon piles, shoring, basin excavation and reinforced concrete works. For context, the project page records work from February 2018 to April 2019, providing a dated example rather than evidence of a current contract.

The company also describes enabling works, including deep excavation, site preparation, earth filling and temporary site infrastructure. For instance, these activities can prepare a site for construction and support access or excavation. Depending on project needs, they may accompany foundation or ground improvement works. Ammico’s published information describes both technical design capability and construction execution.

Business and operations

For readers researching Ammico, these service areas explain the engineering and construction settings associated with the company. They do not confirm a vacancy, employment benefits, project availability or current recruitment activity. Therefore, applicants should check individual job listings for verified role requirements and application instructions.

Company website: https://www.ammico.biz/