Electrical Technician

New

Teyseer Services Company W.L.L

📍 Doha, Qatar 📅 Posted today 🔎 Ref: #35588
💼 Full Time 💰 QAR Negotiable
Review this Technician Jobs opportunity before applying Confirm the role, company, location, requirements and application method shown on this page for Electrical Technician.
💼 Job TypeFull Time
📍 LocationQatar
🏙 CityDoha
🪪 NationalityAny Nationality
💰 SalaryQAR Negotiable
👥 GenderMale
🏭 Company IndustryTechnician Jobs
📄 Experience3 Years
📅 Posted DateToday
Advertisements

Electrical technician jobs Qatar: This Electrical Technician vacancy is based in Doha, Qatar, in the Facility Management sector.

Job description

An Electrical Technician installs, inspects, maintains and repairs electrical systems in commercial buildings and facilities. This work helps keep lighting, power supplies and electrical equipment safe and ready for everyday use. In facility management, even a small electrical fault can affect several rooms, stop equipment from working or create risks for building users. For this reason, the role combines careful checks with practical repairs to address these problems. Finding the cause of a fault, rather than only dealing with its visible effects, helps reduce repeat failures. Installation and maintenance also involve checking that the equipment is safe before it returns to service.

The vacancy calls for hands-on experience in electrical maintenance within Facilities Management. The stated qualification is ITI / Diploma in Electrical Engineering. The listed skills are electrical troubleshooting, DB panels, lighting systems, preventive maintenance and electrical safety. These skills support both planned work and repairs to faults that affect normal building use. DB means distribution board, which distributes electrical power to different circuits in a building. The practical guidance below explains common ways to carry out the confirmed installation, inspection, maintenance and repair tasks. It does not add further qualifications or experience requirements to the vacancy.

Electrical technician jobs Qatar – Safety and quality practices

A typical maintenance task begins with a work request, a fault report or a planned inspection. Reviewing the report helps identify the affected equipment and the symptoms before testing starts. For example, a single light that does not work may need different checks from a whole area without lighting. A fault may involve a lamp, fitting, switch, connection or power supply. For this reason, suitable test equipment and a clear testing plan help find the cause without replacing parts at random. Safe electrical work includes identifying the correct supply, isolating it, preventing it from being switched on and confirming that the equipment is not live before touching electrical parts. Work should stay within the technician’s training and authority.

Advertisements

Practical work stages

Preventive maintenance means checking for wear or damage before it causes equipment to fail. Common inspection points include distribution board panels, lighting fittings, switches, sockets and accessible wiring. Damaged covers, loose fittings, unusual smells or signs of overheating can show that further attention is needed. An inspection should not involve touching exposed parts to check their temperature. For installation and repair work, a safe sequence is to review the task, prepare the area, isolate the supply, complete the work and test the result before returning the system to use. Equipment instructions and relevant safety procedures guide the checks needed for each task.

Clear communication helps reduce disruption during building maintenance. Electrical work may affect nearby rooms, shared power supplies or other staff working on connected equipment. For this reason, agreeing on access and any planned power interruption with the responsible site contact helps avoid unexpected loss of service. Maintenance records are also useful: they show what was checked, what was repaired and what still needs attention. A clear handover can separate completed work from faults that remain unsafe or need further action. The following points describe general working practices for these electrical maintenance tasks, rather than additional employer-specific duties or hiring conditions.

Role-specific work processes

  • Review the work request and identify the circuit, fitting or area affected. Ask when the fault started, whether it happens regularly and what equipment was in use at the time. Check available labels and drawings, but do not rely on a label alone to confirm the correct circuit. Then, use the information to plan checks without disturbing unrelated building services.
  • Inspect DB panels as part of planned electrical maintenance. In particular, check the condition of covers, doors and labels, and note anything blocking safe access. Look for visible damage or signs of heat without touching exposed electrical parts. Checks inside a panel need suitable isolation and safety controls. Record unclear circuit labels or damaged protective covers so they can receive proper attention.
  • Troubleshoot electrical faults using suitable meters and an ordered testing plan. Check that test equipment is in good condition and suitable for the task. Next, compare findings with available drawings and equipment information. A protective device that trips repeatedly needs investigation, not repeated resetting without checking the cause. Report faults that need specialist support or work beyond the technician’s authority.

Daily work and practical tasks

  • Maintain lighting systems by checking lamps, fittings, switches and related connections under safe working conditions. Use replacement parts that match the fitting and its electrical rating. If the same light fails again, check for a wider fault rather than assuming another lamp replacement will solve it. After repair, test the lighting controls and check that fittings, covers and connections are secure.
  • Carry out preventive maintenance using a clear sequence of checks. Record the equipment or location checked, its condition and any readings taken. Look for wear, damage or changes since the last inspection, where earlier records are available. Then, separate faults needing prompt attention from items that can be planned for later repair. This helps the maintenance team track problems and avoid losing useful findings.
  • Install or replace electrical fittings and components within the approved work scope. Check the location, supply, equipment instructions and suitability of the materials before starting. Correct ratings, secure fixings and protected wiring are important for safe operation. Avoid leaving cables under strain or exposed to damage. Complete the relevant electrical checks before connecting the equipment for normal use, and note any changes in the work record.

Work stages and responsibilities

  • Protect building users throughout electrical work. For example, keep people away from exposed hazards, place tools and materials safely, and keep access routes clear. Where lighting is switched off, consider how people will move through the affected area. Never bypass a safety device to keep equipment running. If a fault cannot be made safe within the task, keep the affected equipment out of use and report the concern.
  • Test completed repairs and confirm that the original fault has been resolved before returning the system to service. Next, record the fault, the action taken, any parts replaced and the results of checks. Explain any remaining limits on use or follow-up work. Remove waste and tools, restore covers and leave the area tidy. Finally, give a clear handover so the responsible person understands the equipment’s condition.

Duties & Responsibilities – Electrical technician jobs Qatar

An Electrical Technician installs, inspects, maintains and repairs electrical systems in commercial buildings and facilities. These daily tasks help keep lighting, power supplies and electrical equipment safe and working reliably.

  • Inspect electrical wiring, sockets, switches and fittings. In particular, look for damage, loose connections, signs of overheating and other problems that need attention.
  • Find electrical faults using suitable test equipment. Check circuits carefully to identify the cause of each fault before starting repairs or replacing any parts.
  • Check distribution board (DB) panels, circuit breakers and connections. Keep circuit labels clear and easy to read, and report any damaged or unsafe components.
  • Install wiring, electrical fittings and replacement components as part of the assigned work. Follow drawings, site instructions and safe working methods when carrying out these tasks.
  • Maintain lighting systems by checking lamps, drivers, switches and controls. Replace faulty parts, then check that the lights work correctly.
  • Carry out preventive maintenance checks at planned intervals. Record test readings and report signs of wear before they cause equipment failure.
  • Isolate electrical supplies before starting maintenance work. Follow lockout procedures and confirm that circuits are safe before touching any wires or connections.
  • Test systems after completing repairs or installation work. Check how the systems work and test their protective devices before returning the equipment to normal use.
  • Work with supervisors and other maintenance technicians to plan access to work areas, manage power interruptions and reduce disruption to people who use the building.
  • Update maintenance records with details of the faults found, repairs completed and parts used. Include any follow-up work that still needs attention.

Candidate Requirements – electrical technician jobs Qatar

Electrical Technician work in facility management involves installing, inspecting, maintaining and repairing electrical systems in commercial buildings and facilities. This work calls for care around building users and checks that systems work safely after installation or repair. A step-by-step approach helps when an electrical fault has several possible causes.

The confirmed requirements are hands-on experience in electrical maintenance within Facilities Management and an ITI / Diploma in Electrical Engineering. The listed skills are electrical troubleshooting, distribution board (DB) panels, lighting systems, preventive maintenance and electrical safety. No minimum number of years of experience is stated.

The points below describe useful working practices for these tasks. They are general guidance for electrical maintenance work, not extra qualifications or hiring conditions.

  • Use a clear troubleshooting method: check the reported symptoms, take measurements safely, and identify the cause before choosing a repair. Then, test the system again after the work.
  • Read wiring diagrams and circuit labels to understand connections during installation, inspection, maintenance and repair. Check unclear labels before starting work.
  • Inspect DB panels for signs of trouble, such as heat damage or loose connections. Report risks clearly and follow safe procedures before touching components.

Relevant experience and ability

  • Check lighting faults carefully, including lamps, fittings, switches and circuit supplies. Test for the cause rather than replacing parts without checking.
  • Keep preventive maintenance records clear, noting inspection results, completed work and faults that need further attention. These notes help with later checks and repairs.
  • Follow safe isolation procedures, check that the supply is off, use suitable protective equipment, and stop work when conditions fall outside safe limits.
  • Explain repair needs to supervisors and coordinate access with site staff to reduce disruption while electrical work takes place in commercial buildings and facilities.

Qualifications & Experience – Electrical technician jobs Qatar

Electrical Technician work in facility management calls for practical knowledge of building electrical systems and safe repair methods. The stated qualification is ITI / Diploma in Electrical Engineering, with hands-on experience in electrical maintenance within Facilities Management. In particular, relevant experience should connect to installation, inspection, maintenance and repair in commercial buildings and facilities.

  • Highlight practical electrical troubleshooting experience. Useful examples include tracing a lighting fault, finding a damaged connection and checking that a repair has solved the problem.
  • Describe your experience with DB panels and lighting systems. In particular, explain which equipment you have worked on and your part in inspection or repair tasks.
  • Give examples of preventive maintenance, such as following checklists, spotting signs of wear and recording faults for follow-up. This helps show how you support reliable building services.
  • Explain your electrical safety knowledge through real work examples. Helpful learning includes safe isolation, checking for voltage and choosing suitable protective equipment.
  • Training in reading wiring diagrams and using electrical test instruments can support this role. When describing past work, separate tasks you completed yourself from those you supported under supervision.

Skills for electrical technician jobs Qatar

An Electrical Technician in facility management needs practical electrical troubleshooting skills, knowledge of DB panels and lighting systems, and a clear understanding of electrical safety. The role requires hands-on experience in electrical maintenance within Facilities Management and an ITI / Diploma in Electrical Engineering. These skills help the technician install, inspect, maintain and repair electrical systems in commercial buildings and facilities, where faults can affect daily building use.

A careful approach helps the technician find the cause of a fault rather than simply replace a damaged part. Clear communication helps maintenance staff work safely together and keeps building users informed. The technician uses the following skills during daily checks, preventive maintenance and repair work:

  • Fault finding: Trace electrical problems step by step, using signs of faults, circuit checks and test results.
  • DB panel knowledge: Identify circuits and breakers, and check for signs of damage, overheating or loose connections.
  • Lighting maintenance: Check lamps, fittings, drivers and switches to find faults and get the lighting working again.
  • Test equipment use: Choose suitable meters, check their condition and read and understand the results accurately.
  • Electrical drawing reading: Follow wiring diagrams and circuit labels when checking existing components or installing new ones.
  • Preventive maintenance: Follow inspection checklists, spot signs of wear early and record items that need attention.
  • Electrical safety: Isolate electrical supplies, confirm that conditions are safe and keep others away from electrical hazards.
  • Repair accuracy: Choose suitable replacement parts and check that the system works correctly after completing repairs.
  • Team communication: Explain faults clearly, arrange access with others and provide useful notes when handing work over.

Working Conditions & Job Details – Electrical technician jobs Qatar

Electrical Technician work in facility management typically involves close contact with maintenance supervisors, other technicians and building users. Before installation or repair work, the technician agrees on access and any power interruption with the responsible staff. Clear updates help people plan around the work and reduce disruption to building services.

For DB panels and lighting systems, normal safety steps include isolating the supply, checking that circuits are not live and keeping people away from the work area. The technician uses suitable tools and protective equipment, checks connections and tests the system before returning it to use. Unsafe faults need prompt attention and reporting.

Preventive maintenance also needs clear records. For example, the technician notes inspection results, repairs, parts used and faults that need further action. Good handovers help the maintenance team track unfinished tasks and support safe, reliable electrical systems.

How to Apply – Electrical technician jobs Qatar

Application email: recruitment@teyseer-services.com.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Doha jobs.

About the Company

Teyseer Services Company W.L.L provides hospitality, catering, and facility management services in Qatar. The services company began its operations in Qatar in 1987. Its published service information identifies clients and working environments in oil and gas, healthcare, education, construction, remote locations, and commercial workplaces. The company operates across several service categories, including food provision, building maintenance, site upkeep, and staffing for daily workplace functions. Teyseer Services is part of Teyseer Holding, a Qatar-based group founded in 1968. According to the group's official website, Teyseer Holding includes 18 companies across different business sectors. The founding year and group size refer to the parent organization, rather than the individual services company's workforce or contracts. Catering services include…

Read the Teyseer Services Company W.L.L company profile for fuller company details and current openings.

Similar Jobs You May Be Interested In

View all jobs
Apply safely for Electrical Technician Do not pay for an application, interview or job offer. Verify unusual requests before sharing sensitive personal or financial information.
Contact Support
Advertisements