Sr. safety Officer

New

AFCO STEEL

📍 Rabigh, Saudi Arabia 📅 Posted today 🔎 Ref: #35578
💼 Full Time 💰 SAR Negotiable
Review this HSE Jobs opportunity before applying Confirm the role, company, location, requirements and application method shown on this page for Sr. safety Officer.
💼 Job TypeFull Time
📍 LocationSaudi Arabia
🏙 CityRabigh
🪪 NationalityAny Nationality
💰 SalarySAR Negotiable
👥 GenderMale
🏭 Company IndustryHSE Jobs
📄 Experience5 Years
📅 Posted DateToday
Advertisements

Safety officer jobs in saudi: This Sr. safety Officer vacancy is based in Rabigh, Saudi Arabia, in the Steel Fabrication sector.

Job description

The Senior Safety Officer role focuses on HSE support for steel structure erection and lifting operations at the ACWA Power Plant project. This work calls for close attention to how teams move, lift and install heavy steel parts. In this type of role, the officer helps supervisors and crews spot hazards before work starts and review controls as conditions change. The aim is to protect people during steel installation, keep access routes clear and help teams follow safe work methods through each stage of the job.

Safety support normally starts with understanding the planned activity. Before a lift or erection task, the officer reviews the work area, planned sequence and possible risks with the people leading the work. Key points include crane access, ground conditions, lifting equipment, work at height and nearby activities. Strong situational awareness matters because a safe plan may need further review when deliveries arrive, another crew enters the area or site conditions change. The officer needs to notice these changes and explain the risk clearly.

Safety officer jobs in saudi – Safety and quality practices

During steel erection, a senior safety officer typically follows the work from material handling through lifting, positioning and securing each section. This means checking how crews separate people from moving loads and how workers reach elevated work areas. Temporary support and the stability of partly erected steel need careful attention. The safety officer should raise concerns with the responsible supervisor or lifting team rather than make engineering decisions outside the role. Clear communication helps teams deal with hazards before continuing the affected activity.

Advertisements

The confirmed requirements include a minimum of 5 years of experience in Health, Safety, and Environment (HSE), plus experience in steel structure erection and lifting operations. The vacancy also calls for a bachelor’s degree or diploma in a relevant field, good English communication skills, and strong situational awareness and risk assessment skills. Valid NEBOSH, OSHA, and KAWADER certifications or qualifications are part of the stated requirements. These terms sit alongside the practical safety work described here; no specific degree subject or further certificate is stated.

Practical work stages

At senior officer level, useful daily work goes beyond finding faults. It includes explaining why a control matters, checking whether crews understand it and following up on agreed actions. Short safety briefings, clear inspection notes and accurate reporting help supervisors see what needs attention. In steel erection, practical records can show recurring issues such as blocked access, weak barriers or unsafe positioning near a load. The following activities describe typical safety support for this type of work, with the actual scope guided by project procedures.

  • Review risk assessments and work methods before steel erection starts. Discuss the task sequence with supervisors and identify where workers could face falling objects, moving equipment, unstable steel or open edges. Check that the proposed controls match the actual work area.
  • Support lifting safety checks with the lifting team. Review access, barriers, load travel routes and the position of nearby workers. Raise concerns about unclear signals, damaged lifting gear or people entering the lifting area, and follow the project’s reporting process.
  • Walk through erection areas during active work. Look for changes that could affect safety, including loose materials, poor access or nearby work that creates another hazard. Share findings promptly with the supervisor and track the agreed response.

Team coordination and communication

  • Check work-at-height arrangements before crews use them. Typical points include suitable access, edge protection, fall protection equipment and rescue arrangements. Discuss gaps with the responsible team and check that workers understand the controls for their task.
  • Give focused toolbox talks linked to the day’s steel work. Use simple English and practical examples to explain lifting zones, pinch points, falling objects and safe access. Ask questions to check understanding rather than only collecting attendance.
  • Coordinate with supervisors and other work teams when activities overlap. For example, steel deliveries, crane movements and nearby welding may affect the same area. Help teams identify these shared risks and agree on safe access and separation.
  • Record inspection findings and follow up on corrective actions. Describe the hazard clearly, note who will address it and check progress. Keep records useful for daily decisions, rather than filling reports with unclear statements or repeated observations.
  • Support incident and near-miss reviews by collecting clear facts about the task, location and conditions. Help identify practical prevention steps and share relevant lessons with crews. Check whether revised controls address the original risk during later inspections.

Duties & Responsibilities – Safety officer jobs in saudi

Senior Safety Officer work focuses on controlling risks during steel structure erection and lifting operations. Typical responsibilities include checking site conditions, guiding crews and helping supervisors address hazards before work starts.

  • Review risk assessments for steel erection and lifting tasks. Discuss the work sequence with supervisors and check controls before crews begin.
  • Inspect erection areas for unstable steel members, open edges, poor access and falling-object risks. Follow up on any safety gaps.
  • Check lifting plans with the lifting team, including load weight, crane position, ground conditions and safe clearance from nearby structures.
  • Review inspection records for cranes, slings, shackles and other lifting gear. Report damaged equipment and keep it out of use.
  • Check exclusion zones around lifting areas. Confirm that operators, riggers and signalers understand how they will communicate during each lift.
  • Monitor work at height, including access platforms, harness use and suitable anchor points. Discuss rescue arrangements before elevated work begins.
  • Lead toolbox talks in clear English, using examples from current tasks to explain hazards, safe actions and changing site conditions.
  • Raise unsafe conditions promptly with supervisors and request a pause when controls fail or workers face immediate danger.
  • Record incidents and near misses, help identify causes, and track corrective actions with the people responsible for completing them.
  • Coordinate emergency access, housekeeping and spill controls around erection areas, keeping walkways clear of scrap steel, cables and lifting equipment.

Candidate Requirements – safety officer jobs in saudi

Senior Safety Officer work in steel fabrication involves spotting hazards and helping crews manage risks during erection and lifting operations. This vacancy is for the ACWA Power Plant project. Confirmed requirements include a minimum of 5 years of experience in Health, Safety, and Environment (HSE), plus experience in steel structure erection and lifting operations.

The role requires a bachelor’s degree or diploma in a relevant field, good English communication skills, and strong situational awareness and risk assessment skills. Valid NEBOSH, OSHA, and KAWADER certifications or qualifications are also confirmed requirements. Beyond these hiring requirements, useful strengths for this type of work include:

  • Sound judgement around suspended loads, moving cranes and partly erected steel frames, with the confidence to raise concerns before crews face harm.
  • The ability to follow lifting plans and discuss load routes, ground conditions and safe access with lifting supervisors and erection teams.
  • A practical approach to risk assessment, including noticing changes in wind, access or nearby activities that may affect an agreed work method.
  • Clear communication during toolbox talks, using simple examples so workers understand hazards, safe working steps and when to seek help.
  • Careful record keeping for inspections, unsafe conditions and follow-up actions, with enough detail for supervisors to understand what still needs attention.
  • A calm but firm manner when discussing unsafe work, listening to crew concerns and helping supervisors agree on safer steps before work continues.

Qualifications & Experience – Safety officer jobs in saudi

The Senior Safety Officer role requires a minimum of 5 years of experience in Health, Safety, and Environment (HSE), including experience in steel structure erection and lifting operations. When preparing an application, candidates can use examples to explain how they assess site risks, notice changes in working conditions and communicate clear safety advice.

  • A bachelor’s degree or diploma in a relevant field is required. State your subject clearly and explain how your studies relate to health, safety and environment work.
  • Valid NEBOSH, OSHA, and KAWADER certifications or qualifications are required. List each qualification clearly and check that your supporting documents show its current status.
  • Experience in steel structure erection and lifting operations is required. Useful examples from your own work may include checking lifting areas, identifying unstable loads and discussing safe access with site supervisors. Describe the hazards you found and the steps taken to control them.
  • Good English communication skills are required. Relevant examples may include giving toolbox talks, writing clear inspection notes and explaining hazards to workers and supervisors.
  • Strong situational awareness and risk assessment skills are required. Prepare examples showing how you noticed a changing risk, such as nearby lifting activity or unsafe access, and helped control it.
  • Further training in lifting safety, work at height and incident investigation can support knowledge for steel erection work. These are useful learning areas, not additional stated qualifications for this role.

Skills for safety officer jobs in saudi

Senior Safety Officer work calls for sound judgement during steel structure erection and lifting operations. Strong situational awareness and risk assessment skills help identify changing hazards, such as moving loads, unstable steel sections and nearby work. Clear decisions help crews control risks before they continue.

Good English communication skills support toolbox talks, safety reports and discussions with supervisors. At senior level, useful strengths include explaining concerns calmly, challenging unsafe actions and following up on agreed controls. The role combines technical knowledge with the confidence to speak up when conditions change.

  • Erection safety: Recognise risks from temporary supports, incomplete connections and the order in which crews install steel members.
  • Lifting awareness: Understand lift plans, load limits, sling condition, crane access and exclusion zones.
  • Risk assessment: Break work into steps, identify hazards and select practical controls for each stage.
  • Work-at-height safety: Identify unsafe access, fall risks and gaps in rescue arrangements before elevated work starts.
  • Site observation: Notice changing ground conditions, poor visibility and people entering lifting areas.
  • Safety communication: Give short, clear instructions and check that workers understand them.
  • Incident reporting: Record facts accurately, separate evidence from assumptions and explain corrective actions.
  • Team coordination: Discuss safety concerns with erection supervisors, crane operators and riggers, then check progress on agreed actions.

Working Conditions & Job Details – Safety officer jobs in saudi

Senior Safety Officer work involves close coordination with erection supervisors, lifting teams and HSE staff. For steel structure work, this usually means discussing the planned sequence, checking nearby activities and making sure teams understand the risks before they start. Clear English helps the officer explain safety concerns and agree on corrective steps.

Typical checks cover lifting zones, crane access, lifting gear, work at height and safe routes around steel components. The officer compares actual conditions with the risk assessment and raises concerns when weather, access or other work changes the risk. Good situational awareness helps spot people entering danger zones or materials blocking access.

Follow-up matters as much as the first check. The officer records findings, agrees on who will take action and checks progress with supervisors. These interactions help teams control risks and keep erection and lifting work safe.

How to Apply – Safety officer jobs in saudi

Application email: mahmoud.afifi@afcosteel.com.sa.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Rabigh jobs.

About the Company

AFCO STEEL is an engineering and steel fabrication company based in Jeddah’s Second Industrial Area, Saudi Arabia. The company describes a facility covering 40,000 square metres, including a 25,000-square-metre enclosed workshop. Its stated operations bring design, fabrication, surface treatment and erection together. This connected scope can help project teams carry engineering plans through production and into site installation, while the exact work depends on each project. The company lists design and engineering, steel fabrication and site erection among its services. Its engineering work includes 2D and 3D tools, structural design, connection design, shop drawings and detailing. In general, these steps establish component dimensions and how parts connect before production. Drawings also give fabrication and site…

Read the AFCO STEEL company profile for fuller company details and current openings.

Company background

Fabrication turns engineering information into steel components. AFCO STEEL describes cutting, welding and assembling structural parts. Its website also lists standards for fabrication, welding, blasting and galvanizing, including AISC and API 650 or equivalent, AWS D.1.1, SA 2 1/2 and 3, and ASTM A 123. These references help readers understand the production activities the company presents. Project documents determine which requirements apply to each job.

Site erection is another part of the company’s stated scope. AFCO STEEL describes installation planning, site supervision and coordination with site representatives. In general, erection brings fabricated parts together at the project location, where drawings, access and site conditions affect the work. Coordinating fabrication with installation can help teams manage the move from workshop components to construction activity. Specific methods and schedules depend on the project.

Business and operations

The company’s project page names bridges in Jeddah and Makkah, a multi-storey car park in Makkah, steel silos and a diesel tank in Jeddah, and a power plant project in Rabigh. These examples place its stated work in transport, parking, storage and industrial settings. They offer useful context when readers compare the company’s listed products and services with a project need. For any specific requirement, readers should confirm scope, applicable standards, product details and installation responsibilities with AFCO STEEL.

Company website: https://afcosteel.com.sa/

Similar Jobs You May Be Interested In

View all jobs
Apply safely for Sr. safety Officer Do not pay for an application, interview or job offer. Verify unusual requests before sharing sensitive personal or financial information.
Contact Support
Advertisements