Safety Coordinator

Safety coordinator jobs Doha: This Safety Coordinator vacancy is based in Doha, Qatar, in the Marine sector.

Job description

A Safety Coordinator helps site teams identify hazards, plan safer work and check that people follow safety controls. This marine-sector vacancy has a strong industrial HSE focus, with confirmed requirements covering heavy industry and high-risk activities. The work connects daily site checks with planning, worker briefings and follow-up action. In this type of role, the coordinator turns safety procedures into clear steps that supervisors and workers can use. The aim is to prevent injury, reduce unsafe conditions and keep safety decisions clear throughout each task.

The normal workflow starts before a job begins. The coordinator reviews the activity, checks its hazards and discusses suitable controls with the people doing the work. During the task, site inspections help confirm that the team follows those controls. If conditions change, the coordinator raises the concern and supports a fresh review before work continues. After inspections, audits or incidents, the role involves recording findings, agreeing actions with responsible staff and checking progress. Clear records help the next team understand what remains open.

Safety coordinator jobs Doha – Safety and quality practices

The confirmed education requirement is a Bachelor’s Degree or Diploma in Occupational Health & Safety, HSE, Engineering, or a related discipline. NEBOSH IGC is mandatory. The vacancy calls for a minimum of 5 years of HSE experience in steel plants, DRI plants, heavy industries, manufacturing, oil & gas, or EPC projects. In particular, steel manufacturing or DRI plant experience is preferred. These requirements point to a need for practical industrial safety knowledge, rather than experience limited to office-based safety records.

The confirmed technical requirements include strong knowledge of PTW, HIRA/JSA, LOTO, risk assessments, incident investigations, and emergency response. These cover permit-to-work controls, hazard identification and task analysis, and lockout/tagout for energy isolation. Practical experience in site safety inspections, audits, toolbox talks, and high-risk activity monitoring is another stated requirement. The vacancy also lists relevant TPC certifications in First Aid, Fire Fighting, CSE, AGT, PTW, LOTO, and WAH. For this reason, candidates should present their relevant training and site experience clearly.

Team coordination and communication

Daily coordination typically involves supervisors, work crews, maintenance staff and HSE colleagues. The Safety Coordinator needs to explain concerns in simple terms and listen when workers describe a task or changing site conditions. Depending on the assigned work, marine and industrial risks may include moving equipment, lifting operations, open edges, hot work or confined spaces. The practical activities below show how the stated safety knowledge can support work planning and site control; they do not define a confirmed project assignment.

• Review permit-to-work arrangements before high-risk tasks begin. In particular, check that the permit describes the job, location, hazards and agreed precautions. Discuss any unclear limits with the supervisor, especially where nearby teams could affect each other’s work.

• Help teams prepare HIRA/JSA reviews and risk assessments. Break the job into clear steps, identify what could harm people and agree practical controls. Revisit the assessment when equipment, access, weather or the work method changes.

• Check LOTO controls with the staff responsible for isolation. Confirm that the team identifies relevant energy sources and follows the agreed process for locks, tags and safe checks before maintenance starts. Raise gaps before workers enter the danger area.

Practical work stages

• Carry out site safety inspections with attention to actual working conditions. For example, look at access routes, barriers, housekeeping, protective equipment and emergency access. Then, record the location and nature of each concern so the responsible person can take clear action.

• Monitor high-risk activities such as confined-space entry, work at height and hot work where these form part of the assignment. Check the relevant permit controls, gas-testing arrangements, fall protection or fire precautions, and report unsafe changes promptly.

• Lead focused toolbox talks before tasks start. Explain the main hazards, the planned controls and what workers should do if something goes wrong. Next, ask questions to check understanding and use crew feedback to spot risks that the planning team may have missed.

• Support audits and incident investigations through accurate evidence. For instance, gather relevant records, speak with people involved and separate facts from assumptions. Help identify why controls failed, then track corrective actions and check whether they address the cause.

• Support emergency readiness by checking that teams understand alarms, reporting routes and response roles. Help review access to first-aid and firefighting equipment within the assigned area. Use drill findings to identify gaps and coordinate follow-up with responsible staff.

Duties & Responsibilities – Safety coordinator jobs Doha

The Safety Coordinator identifies hazards, checks safety controls and helps site teams prevent injuries. Daily duties include inspecting work areas, monitoring high-risk work and keeping clear safety records for marine and heavy industrial activities.

• Inspect work areas, access routes and equipment, and check that teams keep the site clean and tidy. Then, record unsafe conditions, inform supervisors and follow up until the teams correct the problems.
• Review permit-to-work (PTW) documents before high-risk tasks begin. Check that each permit clearly describes the job, its hazards, the control measures and the people responsible.
• Support hazard identification and risk assessment (HIRA) and job safety analysis (JSA). For instance, discuss each step of the work with supervisors and crews as part of these checks.
• Check lockout/tagout (LOTO) controls during maintenance work. Before work starts, confirm that the responsible teams isolate energy sources and check that conditions are safe.
• Monitor confined space entry, hot work, lifting and work at height. During these activities, check access controls, protective equipment and the safety measures that teams have agreed to follow.
• Work with authorised gas testers and entry teams to check gas test records and the safety measures for confined spaces.

Main responsibilities

• Lead toolbox talks about current site hazards and recent findings. Use practical examples that workers can understand and apply in their daily work.
• Support safety audits by checking how teams work on site and collecting records. Next, track actions to correct problems with the people responsible for completing them.
• Help investigate incidents and near misses. Gather the facts and identify the causes, then suggest actions to prevent similar events from happening again.
• Support emergency drills and check first aid and firefighting arrangements. Then, report any gaps in the site's readiness to respond to an emergency.

Candidate Requirements – safety coordinator jobs Doha

Safety Coordinator work involves spotting hazards, checking safety controls and helping site teams prevent harm. A useful candidate pays close attention to equipment isolation, work permits and changing site conditions. In marine and heavy industrial settings, clear communication helps workers understand risks during lifting, confined space entry and work at height. Calm judgement helps the coordinator raise concerns with supervisors and explain why a control needs attention before work continues.

As general role guidance, candidates should be able to compare risk assessments with actual work, explain safe steps during toolbox talks and keep clear inspection notes. They should feel comfortable asking questions when permit details or isolation points are unclear. Careful follow-up helps teams close safety actions, while accurate incident notes support investigations. During emergencies, clear messages help teams follow response plans without confusion. The points below are confirmed vacancy requirements, with steel manufacturing or DRI plant experience listed as a preference.

• Bachelor’s Degree or Diploma in Occupational Health & Safety, HSE, Engineering, or a related discipline.
• NEBOSH IGC – Mandatory.
• HSE experience in the stated industrial environments is required; see the detailed eligibility requirements above.
• Strong knowledge of PTW, HIRA/JSA, LOTO, risk assessments, incident investigations, and emergency response.
• Practical experience in site safety inspections, audits, toolbox talks, and high-risk activity monitoring.
• Relevant TPC certifications in First Aid, Fire Fighting, CSE, AGT, PTW, LOTO, and WAH.
• Steel manufacturing or DRI plant experience preferred.

Qualifications & Experience – Safety coordinator jobs Doha

Safety Coordinator applicants should have the education, HSE experience and certifications listed below. When preparing your CV, give clear examples of hazards you checked, controls you reviewed and safety actions you followed through to completion. For marine work, examples involving lifting near water, vessel access or confined spaces can help show how your safety skills apply, if these were part of your experience.

• Bachelor’s Degree or Diploma in Occupational Health & Safety, HSE, Engineering, or a related discipline. State your qualification title and subject clearly.
• NEBOSH IGC – Mandatory. For this reason, list this separately so the reviewer can find it easily.
• Steel manufacturing or DRI plant experience is preferred. Identify your relevant site types and employment dates to show your experience.
• Strong knowledge of PTW, HIRA/JSA, LOTO, risk assessments, incident investigations, and emergency response. Explain how you applied these in daily site work. In marine settings, these controls can support safe equipment isolation, hot work and rescue planning near water.
• Practical experience in site safety inspections, audits, toolbox talks, and high-risk activity monitoring. Useful examples include recording findings, explaining task hazards to workers and following up on corrective actions. Marine safety checks may cover safe access, lifting areas and risks from moving equipment near quay edges.
• Relevant TPC certifications in First Aid, Fire Fighting, CSE, AGT, PTW, LOTO, and WAH. Include accurate certification details in your application, such as certificate titles, issuing bodies and dates.

Skills for safety coordinator jobs Doha

Safety Coordinator work calls for strong safety knowledge and clear communication during site inspections, audits and high-risk activities. For example, key areas include permit to work (PTW), hazard identification and risk assessment (HIRA), job safety analysis (JSA), and lockout/tagout (LOTO).

Practical judgement helps connect written controls with actual site conditions. Clear explanations, accurate notes and calm decisions support safe coordination with workers and supervisors. In marine work, safety checks may cover changing tides, weather, vessel movement and access between shore and vessels. Controls need review when these conditions change.

• PTW checks: Review the work scope, hazards, approvals and permit limits before teams begin controlled activities. Check for nearby work that could create additional risks.
• HIRA and JSA: Break tasks into steps, identify hazards and check whether controls match the activity. In particular, marine examples include lifting near water, moving equipment and working on wet decks.
• LOTO awareness: Understand energy sources, isolation points and checks that prevent unexpected equipment movement or energy release, including stored pressure.
• Inspection and audit skills: Spot unsafe conditions, record clear findings and track corrective actions through to closure. In marine settings, checks may include safe access, edge protection and clear escape routes.

Safety and quality practices

• High-risk activity monitoring: Recognise control gaps during confined space entry, work at height and other hazardous tasks. For marine activities, watch for suspended loads, vessel movement and fall or drowning risks.
• Incident investigation: Gather facts, listen carefully to witnesses and help identify causes without placing early blame.
• Emergency response: Communicate alerts clearly and understand first aid, firefighting and evacuation arrangements. Marine emergency planning also considers rescue from water and safe access for rescue teams.
• Toolbox talks: Explain task-specific risks in simple language, invite questions and check worker understanding. Discuss changes in weather, access and nearby activities when relevant to the task.

Working Conditions & Job Details – Safety coordinator jobs Doha

Safety Coordinator work involves close contact with supervisors, workers and contractors to keep tasks safe and well planned. In marine operations, this can include discussing changing work areas, access routes and nearby activities before work starts. Clear handovers help teams understand current risks, permit limits and any unfinished safety actions.

Typical coordination includes checking permit-to-work (PTW) documents against the task, reviewing risk assessments and job safety analyses, and confirming lockout/tagout (LOTO) controls with responsible staff. High-risk work needs careful monitoring, especially during lifting, confined-space entry and work at height. Toolbox talks give workers a chance to raise concerns and clarify safe steps.

Site inspections and audits help identify gaps that supervisors need to address. The coordinator tracks corrective actions, supports incident investigations and checks emergency arrangements with relevant teams. The aim is clear responsibility, reliable safety records and timely action before hazards lead to harm.

How to Apply – Safety coordinator jobs Doha

Application email: taki@seaworks.net.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Doha jobs.

About the Company

Company overview Seaworks provides marine construction and dredging services. The company says it began in Kuwait in 1991 as Mubarakia Marine Service Co. It also describes ship management, heavy equipment rental and earthworks, with marine services in Kuwait and Qatar. Its stated activities cover marine and land-based settings. Marine construction and support For marine projects, Seaworks lists hydrographic surveys, soil investigation, pile testing and facility design. Its construction services include dredging, land reclamation, breakwaters, groins, quay walls, jetties and marinas. These activities relate to waterfront development and marine-area work. The company also describes underwater inspection, repair, construction support and salvage. These services can help support the condition and operation of marine structures, although the available…

Read the Seaworks company profile for fuller company details and current openings.

Team coordination and communication

Seaworks describes rental of earthmoving and construction-support equipment, including cranes with capacities up to 400 tons. Renting machinery can help project teams carry out lifting and site preparation without purchasing every item they need. The available information does not include rental terms or a complete equipment list.

Its earthworks services include excavation, trenching, pipeline work and related activities. The company also names process-equipment installation, surface preparation, coating, commissioning and plant maintenance. These services connect construction tasks with industrial facilities. For readers, the stated scope extends beyond marine construction to selected land-based infrastructure work.

Company details

Seaworks reports a relationship with Japan-based ITOCHU Corporation established in 1996 and an agency agreement with Tekfen Construction & Installation Company signed in Kuwait in 2005. Its website names ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 certifications. Seaworks identifies Doha, Qatar, and lists branches in Kuwait, Saudi Arabia and Oman. These details describe its reported history and locations; they do not show that every service is available in each country or confirm current partner status. Readers should confirm the relevant service scope and requirements directly with the company.

Company website: https://www.seaworks.net/