Surveyor

Surveyor Jobs in Riyadh – Job Overview

Yamas Al-Arabia Construction & Contracting is hiring for Surveyor Jobs in Riyadh, Saudi Arabia. For applicants exploring Surveyor Jobs in KSA, Yamas Al-Arabia Construction & Contracting lists a Surveyor vacancy in Riyadh, Saudi Arabia. The notice seeks professionals for its project teams in Riyadh within the construction sector. The listed address is RAWA2938, Northern Ring Branch Cross Abu Bakr Al Siddiq Road, Al Wadi Dist., Riyadh. This role's advertised technical focus covers setting out, levelling and as-built surveys, alongside surveying instruments and drawing software.

Job description

In general construction surveying practice, work starts with drawings and reliable reference points. The surveyor checks the drawing revision, dimensions and coordinate system before planning field measurements. Coordinates show a point's position, while a benchmark provides a known height. If drawings use different reference systems, the surveyor seeks clarification before transferring positions to site. Otherwise, a correct measurement could still place work in the wrong location. The surveyor also checks which construction area needs measurements first. This helps the site engineer plan the next activity without relying on unclear marks or an older drawing.

The listing also the surveyor chooses equipment that suits the measurement and site conditions. A total station measures angles and distances, while an auto level compares heights. GPS/GNSS uses satellite signals to establish positions, but nearby structures can affect reception. Before taking readings, the surveyor checks the instrument setup, target height and reference information. A stable tripod matters because movement can change the result during measurement. The surveyor then observes a known point to test the setup. If that check falls outside the project's accepted limits, the surveyor investigates before using the instrument to guide construction.

Surveyor Jobs in Riyadh – General Occupational Context

Setting out turns drawing information into physical marks that construction crews can use. For each point, the surveyor works from the agreed coordinates and design level. However, placing a mark alone does not complete the task. An independent measurement helps confirm its position, and a clear label explains its purpose. Where excavation may remove a mark, offset marks can preserve the reference nearby. The surveyor explains the distance between those marks and the intended construction line. Before crews act, they need to understand which marks show position, which show height, and which provide backup references.

One practical example concerns a temporary benchmark near an active excavation. During a repeat level check, the surveyor finds that its height no longer matches another reference. The difference could come from a reading error or movement of the benchmark itself. Instead of adjusting construction levels to match it, the surveyor repeats the observations from a reliable reference. If the difference remains, the surveyor alerts the site engineer and identifies affected measurements. The engineer then has clear evidence for deciding what needs another check. Work should not rely on that benchmark until the team resolves the uncertainty.

Coordination and completion

As-built surveys record what crews actually constructed, rather than what the design originally showed. The surveyor captures enough points to describe the completed feature and its level. When a feature will become hidden by later work, measurement must happen before access disappears. Back at the drawing stage, the surveyor checks point names, units and coordinates before importing data into AutoCAD. A neat drawing cannot correct an incorrect field record. Therefore, the surveyor compares the drawing with field notes and separates measured information from design information. Any difference needs a clear location and value so the engineer can assess it.

The same notice the surveyor prepares records that another person can follow without repeating the whole survey. Useful records connect each measurement to its date, reference points and drawing revision. When the site engineer reviews a result, these details show how the surveyor obtained it. The handover also distinguishes completed checks from items that still need clarification. If a design change affects an earlier survey, the record should identify the relevant area. Keeping raw observations alongside the final drawing allows later checks. This closes the measurement cycle and gives the next construction activity a clear, traceable starting point.

Typical Duties & Responsibilities (General Role Guidance)

• Inspect access routes before fieldwork, and identify areas where plant movements could place the survey team at risk.
• Arrange clear sightlines with site staff so materials or temporary barriers do not block planned observations.
• Maintain an equipment condition log, and report damaged accessories before they affect the quality of field measurements.
• Check survey requests against the assigned work area, and clarify requests that extend beyond the agreed scope.
• Identify reference markers that need protection, and notify site staff before nearby activities could disturb them.
• Track outstanding survey requests so the construction team knows which areas still need field attendance.
• Organise survey files by work area and revision so colleagues can retrieve the correct measurement record.
• Prepare clear sketches of site features when photographs alone cannot explain their measured positions or relationships.

Candidate Profile

Applicants can prepare a brief, truthful example of surveying a drainage line before backfilling. Explain which measurements you took, how you checked the pipe gradient, and what record you produced. If you share a drawing sample, remove confidential project details and explain your own contribution. Also, distinguish equipment you operated yourself from equipment you only observed others using. This preparation is practical advice, not an additional employer requirement. Before accepting an offer, ask about project allocation, survey team support and responsibility for instrument checks. Clarify the working schedule and salary directly with the employer.

Qualifications & Requirements

• Experience: 3 Years; Proven surveying experience on construction projects, preferably residential; Hands-on experience with Total Station, GPS/GNSS and auto level.
• Education or qualification: Diploma or Bachelor's degree in Surveying, Civil Engineering or a related field.
• Proven surveying experience on construction projects, preferably residential
• Hands-on experience with Total Station, GPS/GNSS and auto level
• Saudi Council of Engineers (SCE) membership
• 3 years of experience.
• Strong skills in setting out, levelling and as-built surveys.
• Proficiency in AutoCAD; Civil 3D is a plus.

Employer-stated Skills & Competencies

• Strong skills in setting out, levelling and as-built surveys
• Proficiency in AutoCAD; Civil 3D is a plus
• Setting out, levelling and as-built surveys.
• Total Station, GPS/GNSS and auto level.
• AutoCAD proficiency.
• Civil 3D is a plus.

How to Apply

Kindly send us your CVs at cv@yamas.com.sa mentioning the position you are interested with.

About Yamas Al-Arabia Construction & Contracting

Yamas Al Arabia Construction describes its work as providing integrated engineering solutions in the building sector. Its company statement highlights technical expertise, modern approaches, and a focus on quality and safety. It also presents turning clients' plans into built results as a business aim.