Field Surveyors

Field surveyors jobs Doha: This Field Surveyors vacancy is based in Doha, Qatar, in the Oil & Gas sector.

Job description

Accurate field measurements help construction teams position work correctly on site. In the Oil & Gas sector, these measurements help engineers and supervisors check layouts, guide construction and record what crews have built. This vacancy requires a minimum of 5 years of experience in the Oil & Gas sector. The description below covers common field surveying activities in this sector. However, it does not confirm which project tasks the surveyors will carry out or which equipment they will need to use.

A typical survey starts with understanding the area and the reason for taking measurements. In particular, surveyors study the latest drawings, review existing survey records and confirm the points that will guide their work. These reference points show known positions and heights that surveyors use to check later measurements. Before taking readings, they check their equipment, choose suitable locations and make sure they can work safely. Careful checks at this stage help prevent measurement errors from affecting later excavation, foundation work or the placement of equipment supports.

Field surveyors jobs Doha – Daily work and practical tasks

Fieldwork links the design drawings to actual conditions on the ground. Surveyors commonly mark positions, lines and levels for construction teams, then check that these marks match the approved layout. For example, depending on the project, this work may cover foundation centres, access routes, drainage lines or pipe support positions. Surveyors need to keep clear records of each point and explain the meaning of the marks to the teams using them. If a drawing does not match the site, they report the difference to the engineer rather than make a change without support.

Checking measurements matters just as much as collecting them. Surveyors compare new readings with known points, take measurements again when they doubt a result and look for possible errors in distances or heights. Common tools include total stations, levelling instruments and satellite positioning equipment, though the choice depends on the task and site conditions. Accurate field notes help office staff understand the results and prepare drawings. With clear survey records, the next crew can continue the work without guessing which point, level or drawing version the surveyor used.

Team coordination and communication

Oil and gas sites need careful coordination because surveyors may work near moving vehicles, lifting operations, excavations or operating equipment. For this reason, surveyors normally agree with the site team on access to the work area and follow the controls that apply there. They plan their measurements around nearby activities while keeping the results accurate. As construction moves forward, they may return to check positions and record final locations. Engineers use these records to compare completed work with the design, identify differences and prepare reliable information for the handover of the work.

• Review the survey request before going to the field. In particular, confirm the area, the drawing reference and the measurements that the site team needs. Check whether the task involves setting out new work, checking an existing position or recording construction that crews have completed.

• Find and check the survey control points. These fixed points guide measurements of position and height across the site. Check each marker for signs that vehicles, excavation or other site activity may have damaged it or moved it from its position.

Role-specific work processes

• Set up instruments with care and carry out suitable checks before taking readings. For example, choose a stable location that gives a clear view of the survey points. Record anything that could affect the measurement results, such as blocked views or ground that site work has disturbed.

• Use clear setting-out marks to show drawing positions on the site. Then, label the points so supervisors and crews can identify them easily. Explain the reference lines and levels, especially where nearby work could hide or remove the marks, or make their meaning unclear.

• Measure ground levels and visible site features to support construction planning. Use consistent point names and descriptions throughout the records. Useful records show both the reading and the feature it represents, such as an excavation edge, a foundation corner or a drainage route.

• Compare the field results with the design and report any differences promptly. Check unusual readings again before passing them on. Next, give the engineer enough detail to find the issue, understand its effect and decide what action the construction team should take.

Practical work stages

• Coordinate access for survey work with supervisors and other work crews. Keep equipment clear of vehicle routes where possible, respect restricted areas and protect survey marks. Report access problems or difficulties seeing survey points early so the team can arrange a safe way to complete the measurements.

• Record completed positions and levels for as-built drawings, which show what crews actually constructed. Then, organise field notes and measurement files using clear dates and references so teams can follow the records. A complete survey record supports review, reduces repeat visits and gives later teams reliable information about the finished work.

Duties & Responsibilities – Field surveyors jobs Doha

Field Surveyors measure site positions, levels and distances to support accurate oil and gas construction work. Typical field survey duties include:

• Review survey drawings, coordinates and reference levels before fieldwork. Clarify unclear dimensions with the site engineer before setting out points.
• Check survey control points and benchmarks against project records. Report damaged or disturbed markers before using them for measurements.
• Set out positions for foundations, equipment bases, pipe supports and underground service routes using the relevant construction drawings.
• Use total stations, GPS equipment and levels as appropriate to collect measurements. Check instrument setup before recording readings.
• Measure ground levels and site features to help engineers plan excavation, filling and access around oil and gas facilities.
• Compare installed positions and levels with design values. Then, flag differences early so the construction team can review them.
• Keep clear field notes showing point numbers, coordinates, dates and drawing references so others can trace each measurement.
• Collect as-built survey data after installation and share accurate records with engineers and drawing teams for project documentation.
• Coordinate survey access with site supervisors and safety staff, following permit controls and keeping clear of operating equipment.
• Protect survey instruments during transport and storage. Report faults and arrange checks when readings appear inconsistent.

Candidate Requirements – field surveyors jobs Doha

Field Surveyors in oil and gas need to take careful measurements and understand site plans clearly. Candidates should describe relevant project work clearly, explaining which survey activities they carried out and how their work supported teams on site.

The profile below offers general guidance on skills that support field surveying; it does not add any extra confirmed hiring requirements. Candidates with these skills can compare field readings with drawings, notice differences early and explain their findings in simple language. Their work history should show that they value accurate measurements, safe working practices on site and clear records of their work.

• Confidence in reading survey drawings, coordinates and levels helps candidates find the correct points on site and understand why the team needs each survey.
• Practical knowledge of survey instruments, such as total stations and levelling equipment, helps candidates set up equipment carefully, take reliable readings and carry out routine equipment checks.
• A careful approach to control points and benchmarks helps candidates keep measurements consistent as survey work moves between different areas and through different stages.

Relevant experience and ability

• Good checking habits help candidates spot unusual readings, take measurements again when needed and report differences before site teams use the survey results.
• Clear note-taking helps candidates keep field records that others can check and follow, with point references, dates and enough detail for another surveyor to understand the work.
• Good communication helps candidates discuss site access, survey limits and measurement issues clearly with engineers, supervisors and other workers on site.
• Awareness of oil and gas site hazards helps candidates plan work sensibly around equipment, restricted areas and operations that continue while survey work takes place.
• An organised approach helps candidates manage their survey files, keep information in order and share accurate details so that others can review the work.

Qualifications & Experience – Field surveyors jobs Doha

In your application, give dates that demonstrate your sector experience and explain the survey work you completed. Describe your part in checking site measurements, rather than listing project names alone. The points below are guidance for presenting relevant experience, not additional employer requirements.

• Describe any experience with setting out, checking levels and recording site coordinates on oil and gas projects. Explain which tasks you handled yourself and when you worked with a senior surveyor.
• List survey equipment you have used, such as total stations, GPS/GNSS receivers or automatic levels. Next, explain how you checked the equipment setup and dealt with readings that did not match expected measurements.
• If relevant, include learning in land surveying, construction measurement or civil engineering. Practical training in reading drawings, using coordinate systems and calculating levels can help explain your surveying knowledge.
• Mention any experience with survey software, CAD drawings or digital field records. Then, explain how you turned measurements into clear information for engineers and site teams, including how you recorded checks or corrected errors.
• Describe relevant site safety training and experience working near operating equipment, if applicable. Examples of following access controls and planning measurement work with site supervisors can show how you carried out surveys safely.

Skills for field surveyors jobs Doha

Field Surveyors use accurate measurements to support safe construction and clear site records in oil and gas projects. Strong survey skills help teams position works correctly and spot differences between drawings and site conditions.

Relevant abilities combine careful instrument use with clear communication. Survey work can involve pipeline routes, equipment foundations, access roads and existing services. A surveyor should explain measurement problems early, protect reference points and keep records that other team members can follow. Useful technical and interpersonal skills include:

• Survey equipment use: Set up total stations, GPS/GNSS receivers and levels, and check readings before use.
• Drawing interpretation: Read site plans, coordinates, elevations and drawing revisions without mixing old and current information.
• Setting out: Transfer design positions and levels to the ground using checked survey control points.
• Measurement checks: Repeat key observations and compare results to find errors before crews start work.
• Survey records: Keep clear field notes, point descriptions and measured positions of completed work.
• Data handling: Transfer survey files carefully and check units, labels and coordinate systems.
• Site coordination: Explain survey marks and agree access with engineers, supervisors and nearby crews.
• Safety awareness: Notice moving plant, open excavations and restricted areas when planning survey tasks.

Working Conditions & Job Details – Field surveyors jobs Doha

Field Surveyors in oil and gas typically coordinate with site engineers, construction supervisors and safety staff before taking measurements. For example, they agree on survey areas, check access and confirm which drawings and reference points apply. Clear communication helps crews use the correct positions and levels without disrupting nearby work.

Site checks commonly include confirming instrument settings, checking known survey points and repeating readings when results do not match. Surveyors report differences to the responsible engineer before crews rely on uncertain data. They keep field notes clear so colleagues can trace measurements and understand any changes.

Work near moving equipment, excavations or operating facilities calls for careful coordination. For this reason, surveyors follow site access controls, use suitable protective equipment and stop if conditions make measurement unsafe. Accurate survey records and timely handovers help construction teams check completed work, avoid errors and plan the next activity.

How to Apply – Field surveyors jobs Doha

Application email: career@ammico.biz.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Doha jobs.

About the Company

Ammico International Contracting Co. works in geotechnical engineering, foundation construction, ground improvement and marine works. According to its website, Ammico has more than 50 years of international experience and operations in Qatar, Saudi Arabia and the United Arab Emirates. In Qatar, the website identifies the local entity as Ammico International Contracting & Trading Co. W.L.L., with a postal address in Doha. Foundation engineering is a central area of Ammico’s published services. The company lists bored cast-in-situ piling, diaphragm walls, shoring, earth retention systems, ground anchors, micro piling and dewatering. For example, these methods can support foundations or retain ground beside deep excavations. Project teams select suitable methods based on engineering design, site investigations and surrounding…

Read the Ammico International Contracting Co. company profile for fuller company details and current openings.

Company background

Ammico lists vibro compaction, stone columns, grout columns, rigid inclusions, rapid impact compaction and dynamic replacement among its ground improvement methods. In general, these techniques can help address challenging soil conditions. However, their suitability depends on project specifications and ground investigations. Ammico’s published projects include rigid inclusion works at Rua Al Madinah in Saudi Arabia and stone column works at Business Bay in Dubai.

Marine construction is another documented service area. Ammico lists marine piling, jetty and dolphin construction, sheet piling, dredging and shoreline protection. Its Old Doha Port marine facility project in Qatar included boat ramp and marina pontoon piles, shoring, basin excavation and reinforced concrete works. For context, the project page records work from February 2018 to April 2019, providing a dated example rather than evidence of a current contract.

The company also describes enabling works, including deep excavation, site preparation, earth filling and temporary site infrastructure. For instance, these activities can prepare a site for construction and support access or excavation. Depending on project needs, they may accompany foundation or ground improvement works. Ammico’s published information describes both technical design capability and construction execution.

Business and operations

For readers researching Ammico, these service areas explain the engineering and construction settings associated with the company. They do not confirm a vacancy, employment benefits, project availability or current recruitment activity. Therefore, applicants should check individual job listings for verified role requirements and application instructions.

Company website: https://www.ammico.biz/