Safety Officer

Safety officer jobs Doha: This Safety Officer vacancy is based in Doha, Qatar, in the Oil & Gas sector.

Job description

A Safety Officer in the oil and gas sector helps site teams recognise hazards and control risks before people start work. The role links safety plans to the conditions workers face around equipment, vehicles and active work areas. The confirmed experience requirement for this vacancy is at least 5 years in the oil and gas sector. The officer focuses on preventing harm through site checks, clear advice and follow-up on safety concerns. The work areas below describe common oil and gas safety activities; they do not confirm an assignment to a specific project.

Safety work normally starts with understanding the task that the team plans to carry out. For example, the officer reviews the work method, checks the risk assessment and discusses the main hazards with the supervisor. However, a written plan alone does not show whether a work area is safe. For this reason, site checks help the officer identify blocked access, nearby operations, damaged equipment or changes in ground conditions. The officer raises these issues with the team responsible for the work so they can agree on suitable controls before the task begins.

Safety officer jobs Doha – Team coordination and communication

During site activities, a Safety Officer stays in contact with workers, supervisors and HSE staff. For example, short safety talks help workers understand the hazards of their task and the steps they need to take to stay safe. Clear explanations matter because teams may have different levels of site experience or speak different first languages. The officer listens to concerns, checks that workers understand and reports unsafe conditions through the site’s agreed process. This communication helps teams correct problems while keeping their attention on the actual risk.

Oil and gas work can involve flammable materials, pressure systems, moving plant and restricted spaces. Construction activities may bring further hazards from lifting operations, excavation edges and underground services. The controls that teams need depend on the task and its location. For this reason, a Safety Officer checks the work area against the current plan instead of relying only on past experience. When conditions change, the officer alerts the supervisor and follows the site procedure to review the task and make the area safe.

Safety and quality practices

Records and follow-up support the practical safety work on site. For example, inspection notes, safety observations and incident reports help supervisors see what needs attention and who will take action. Clear records describe the hazard, its location, the action that the team agreed to take and progress towards closing the issue. As part of the follow-up, the officer checks whether that action has solved the problem. This approach helps teams learn from near misses, avoid repeating unsafe practices and keep safety information useful when they plan daily work.

• Review task risk assessments with supervisors before activities begin. Check that each assessment covers the actual tools, materials, access routes and nearby work that may affect the task. Raise gaps, such as an unprotected edge or a vehicle route crossing a pedestrian path, so the team can address them.

• Check permit-to-work arrangements where the site uses them. For activities such as hot work or entry into confined spaces, compare the controls listed in the permit with conditions in the work area. Then, report missing approvals, unclear limits or changes in the planned work to the staff responsible for permits.

Practical work stages

• Walk through active work areas and record clear safety observations. Check housekeeping, barriers, emergency access and how the team keeps people separate from moving equipment. Discuss concerns with the area supervisor and follow up on actions to address them, rather than simply recording the same problem again.

• Support safe lifting and plant movement by checking work zones, access and warning arrangements. Watch whether people stay clear of suspended loads and equipment as it moves through the work area. Then, raise concerns with the lifting supervisor or the person leading the site work without taking over specialist operating duties.

• Monitor excavation and ground-related hazards where these activities form part of the work. Check barriers, safe access, nearby plant movement and any signs that conditions are changing. Then, report concerns about ground support or excavation stability to the supervisor and the technical staff responsible for these matters.

• Deliver focused toolbox talks using examples from the day’s tasks. Explain the main hazard, the control measures and how workers should report a problem when they notice one. Invite questions and check that the group understands the message, rather than assuming that attendance alone shows understanding.

Daily work and practical tasks

• Help maintain emergency readiness by checking access to assembly points, alarms and response equipment as relevant to the site. Support drills and note practical problems, such as directions that workers find unclear or routes that obstacles block, so the responsible team can take action to correct them.

• Support incident and near-miss reporting by gathering facts promptly and accurately. For instance, record what happened, where it happened and the conditions at the time of the event. Help track the actions that the team agreed to take to correct problems, and share useful lessons with site teams without blaming people or drawing conclusions that the facts do not support.

Duties & Responsibilities – Safety officer jobs Doha

Safety Officer work in oil and gas focuses on finding hazards and helping crews follow safe work methods. Typical duties include:

• Inspect work areas before activities begin. Check access routes, barriers, housekeeping and signs, then report unsafe conditions to site supervisors.
• Review task risk assessments with supervisors and workers. Make sure crews understand hazards and the controls needed before starting.
• Check permits for hot work, confined space entry and excavation, where relevant. Raise missing approvals or unclear limits before work proceeds.
• Lead toolbox talks on current site risks, using clear examples that match the tasks crews will carry out that day.
• Monitor personal protective equipment use and explain how workers should select, wear and check protection for each task.
• Check lifting areas with the lifting team, keeping people clear of suspended loads and confirming that barriers remain in place.
• Watch for fire, gas and chemical hazards. Report leaks promptly and follow site procedures for alarms, isolation and evacuation.
• Support incident and near-miss reviews by gathering facts, recording observations and tracking agreed actions with the responsible supervisors.
• Check emergency equipment and escape routes, support drills, and record problems that could delay a safe response.

Candidate Requirements – safety officer jobs Doha

Safety Officer work in oil and gas involves spotting hazards, explaining safe work methods and helping site teams control risks. Candidates should describe relevant safety work in their CV, including dates, job titles and examples of the operations they supported.

Beyond this confirmed requirement, a useful general profile includes careful observation, clear communication and sound judgement when conditions change. Relevant experience may cover site inspections, permit checks, safety talks and incident reporting. The points below describe abilities that support this type of work, rather than additional hiring conditions.

• Recognise common oil and gas hazards, including flammable materials, gas leaks, pressure systems and moving equipment. Then, explain the possible harm in simple terms.
• Understand permit-to-work controls and how teams manage hot work, confined space entry and isolation before a task starts.
• Read risk assessments and compare the planned controls with actual site conditions. Raise concerns when the work area or task changes.
• Speak clearly with workers and supervisors. For instance, give short safety briefings and check that people understand the precautions.
• Keep accurate inspection notes and incident records. In particular, describe what happened, where it happened and which actions need follow-up.
• Stay calm during alarms or unsafe situations. Follow site emergency procedures and help people understand the next safe step.
• Work with operations and maintenance teams to follow up safety concerns. In particular, check progress on agreed actions and report any unresolved risks.

Qualifications & Experience – Safety officer jobs Doha

Safety Officer applicants need five years of experience in the oil and gas sector. In your CV, give clear employment dates to show this experience. Explain the types of sites you have worked on and the safety work you handled. Give examples of your own actions, rather than listing only project names or HSE terms. The points below are guidance for describing relevant experience, not additional hiring requirements.

• Describe any experience with site inspections, hazard reporting and follow-up checks. In particular, explain how you worked with supervisors to correct unsafe conditions and confirm that teams completed agreed actions.
• Highlight any work with permit-to-work systems and risk assessments. Examples involving hot work, confined spaces, lifting or excavation can help show your understanding of oil and gas site risks. State your own role in these activities.
• Include any experience giving safety briefings or toolbox talks. For instance, mention how you explained safe work steps to crews with different language levels.
• Relevant learning in occupational safety, fire prevention, first aid or incident investigation can support this work. List only training and certificates you have completed, with accurate dates.
• Give examples of preparing inspection records or incident reports, where relevant to your experience. In particular, explain how you recorded facts, tracked corrective actions and shared lessons with site teams.

Skills for safety officer jobs Doha

Safety Officer work in Oil & Gas calls for careful hazard checks, clear reporting and calm communication. Practical safety knowledge helps officers spot unsafe conditions and explain controls before workers begin a task.

Useful strengths include sound judgement, close attention to site changes and respectful communication with workers and supervisors. For example, an officer should explain risks in simple words, listen to concerns and follow up on agreed safety actions. Relevant technical and interpersonal skills include:

• Hazard identification: Recognising fire risks, gas exposure, moving equipment and unsafe access during site checks.
• Risk assessment: Breaking tasks into steps, identifying possible harm and selecting controls that reduce exposure.
• Permit-to-work awareness: Understanding permit limits, required checks and approval steps for higher-risk activities.
• Gas safety knowledge: Understanding detector readings, alarm warnings and when to raise concerns with authorised personnel.
• Emergency communication: Giving clear location details, describing the danger and following site reporting procedures.
• Incident reporting: Recording facts accurately, separating observations from assumptions and tracking corrective actions.
• Toolbox talk delivery: Explaining task hazards briefly and checking that workers understand the safety message.
• Safety coordination: Discussing overlapping work with supervisors and raising unresolved risks through the correct reporting route.

Working Conditions & Job Details – Safety officer jobs Doha

Safety Officer work in oil and gas usually involves regular contact with supervisors, workers, contractors and HSE colleagues. Clear communication helps these teams understand hazards before they start a task and respond when site conditions change. To support this, the officer may check work permits, discuss ways to control risks and confirm who will follow up on safety concerns.

Routine checks can cover protective equipment, safe access to work areas, barriers and emergency routes. When teams plan higher-risk tasks, the officer may review safety measures for lifting, hot work or entry into confined spaces with the team responsible for the work. If any safety control is missing, the team needs to address it promptly through the agreed site reporting process.

Accurate inspection notes help supervisors track problems and check that corrective actions deal with the risk. Short safety talks and clear handovers help teams share this information as work continues. The aim is to reduce unsafe conditions, keep safety information up to date and help teams carry out their tasks with suitable controls in place.

How to Apply – Safety officer jobs Doha

Application email: career@ammico.biz.

Send your application to the employer email address shown above.

Looking for other roles in this area? Browse Doha jobs.

About the Company

Ammico International Contracting Co. works in geotechnical engineering, foundation construction, ground improvement and marine works. According to its website, Ammico has more than 50 years of international experience and operations in Qatar, Saudi Arabia and the United Arab Emirates. In Qatar, the website identifies the local entity as Ammico International Contracting & Trading Co. W.L.L., with a postal address in Doha. Foundation engineering is a central area of Ammico’s published services. The company lists bored cast-in-situ piling, diaphragm walls, shoring, earth retention systems, ground anchors, micro piling and dewatering. For example, these methods can support foundations or retain ground beside deep excavations. Project teams select suitable methods based on engineering design, site investigations and surrounding…

Read the Ammico International Contracting Co. company profile for fuller company details and current openings.

Company background

Ammico lists vibro compaction, stone columns, grout columns, rigid inclusions, rapid impact compaction and dynamic replacement among its ground improvement methods. In general, these techniques can help address challenging soil conditions. However, their suitability depends on project specifications and ground investigations. Ammico’s published projects include rigid inclusion works at Rua Al Madinah in Saudi Arabia and stone column works at Business Bay in Dubai.

Marine construction is another documented service area. Ammico lists marine piling, jetty and dolphin construction, sheet piling, dredging and shoreline protection. Its Old Doha Port marine facility project in Qatar included boat ramp and marina pontoon piles, shoring, basin excavation and reinforced concrete works. For context, the project page records work from February 2018 to April 2019, providing a dated example rather than evidence of a current contract.

The company also describes enabling works, including deep excavation, site preparation, earth filling and temporary site infrastructure. For instance, these activities can prepare a site for construction and support access or excavation. Depending on project needs, they may accompany foundation or ground improvement works. Ammico’s published information describes both technical design capability and construction execution.

Business and operations

For readers researching Ammico, these service areas explain the engineering and construction settings associated with the company. They do not confirm a vacancy, employment benefits, project availability or current recruitment activity. Therefore, applicants should check individual job listings for verified role requirements and application instructions.

Company website: https://www.ammico.biz/